Item # bci1213527

Emtek Athena Stainless Steel Passage Leverset

Model: S100AT-EBS

$137.60
Finish: Choose Finish
  • Brushed Stainless Steel
    Brushed Stainless Steel
    $137.60
    Special Order

Function: Passage

Dummy Set
Passage
Privacy

Special Order
Configure Your Emtek S100AT Athena Stainless Steel Passage Leverset
  • Backset

    The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
    Please Select One
  • Door Thickness

    Door Thickness

    Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
    Please Select One
  • Handing

    Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
    Please Select One
  • Latch Type

    Most residential doors are mortised for either a round corner or square corner latch. Drive-in latches do not have a faceplate and are generally used on hollow doors.
    Please Select One
  • Rosette Style

    A rosette is a decorative trim plate used to cover the bore hole and complement the knob/lever. Choose the look you want by selecting the rosette of your choice!
    Please Select One

Product Overview

All Emtek items are made to order.

Emtek's passage leversets use traditional American latches complete with a variety of trim styles, handcrafted from authentic materials. The leverset is operated by a lever from both the interior and exterior. With the passage function, the door does not lock from either side. Uncompromisingly rugged and beautifully crafted, these locks are suitable for the very finest homes.

For a striking, contemporary look, Emtek's stainless steel handlesets cannot be beat. The latches are heavy-duty die cast construction, with strong internal springs, solid brass nose bolts, and sintered metal cams. A plastic bushing located in the joint between the handle and the rosette ensures a friction-free wear surface, preventing metal from bearing on metal and providing smooth, long-lasting operation. Handles are positively connected to rosettes with a permanent clip. Each has a set screw which eliminates "handle wobble" when tightened. Emtek's threaded tubes are machined brass to ensure good threads and prevent corrosion.

Features:

  • Standard Door Prep
  • Stainless Steel

Specifications:

  • Lever Width: 5"
  • Projection: 2.73"
  • Material: Stainless Steel
  • Door Thickness: 1-1/4" - 3"
  • Backset: 2-3/8" or 2-3/4"

Emtek is dedicated to bringing interesting, well made hardware back into American homes. Emtek's mission is to satisfy the higher expectations of today's homeowners with regard to door locks. They strive to provide a broad and interesting range of products that consumers can use as elements of decor, and not just as a way to latch a door.


This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8"
Cross Bore
2-1/8"
Door Thickness
1-1/2", 1-1/4", 1-3/4", 1-3/8", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8", 2-7/8", 3"
Edge Bore
1"
Handle Length
5 in.
Handle Projection
2.73 in.

Characteristics and Features

Function
Passage
Handing
Left
Handle Material
Metal
Latch Faceplate
Drive-In, Round Corner
Lever Shape
Straight
Material
Stainless Steel
Rosette Shape
Round, Square
Style
Contemporary/Modern
Theme
Modern

Warranty and Product Information

Approved for Commercial Use
No
Series
Athena