Elkay 8 GPH ADA Versatile Wall Mount Bi-Level Filtered Cooler with Prepped Glass Filler and Cane Apron

Elkay 8 GPH ADA Versatile Wall Mount Bi-Level Filtered Cooler with Prepped Glass Filler and Cane Apron

Elkay is sure to have a water cooler or drinking fountain that will meet or exceed your specifications.

Product Features:

• Reversible, two-level self-contained wall hung water cooler
• Electric refrigerated
• Self-closing Easy-Touch controls on front, right and left sides
• Hooded stream projector
• Valve with built-in flow regulator to provide constant stream from 20 to 105 psi water pressure
• Non-pressurized Stainless steel cooling tank system is standard
• Non-pressurized water tank is located after bubbler valve (so that tank is subject to line pressure only when valve button is pressed)
• ADA compliant
• No lead design
• Watersentry VII Filter System provides taste and odor improvement
• Construction
  • New: Elkay's Versatile engineering allows custom configuration to meet every need. Flexible design allows reversible low-high or high-low installation.
  • Frame - Galvanized structural steel chassis supports refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler
  • Stainless Steel Basin - One piece. No exposed fasteners
  • Exclusive Flexi-Guard Safety Bubbler - Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position
  • Upper Shroud - Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners
  • Lower Shroud - One piece easy to remove and replace. Allows access to internal components from three sides, available in 2 finishes
  • Cabinet - Cabinet design allows for flush to Wall mounting. No recess space required
• Cooling System
  • Motor Compressor - Hermetically sealed, reciprocating type, single phase. Sealed in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug
  • Condenser - Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated
  • Cooling Unit - Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated
  • Refrigerant Control - Refrigerant type HFC-134a is controlled by accurately calibrated capillary tube for positively trouble free operation
  • Temperature Control - Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. Easily accessible

Product Specifications:

• Base Flow Rated: 8.0
• Rated Watts: 370
• Full Load Amps: 4.0
• Fountain Type: Cooler
• Shipping Weight: 92 lbs
• Installation Type: Wall
• Hands Free Operation: No
• Voltage: 115V/60Hz
• Height: 24-5/16"
• Width: 36-3/4"
• Depth: 19"
• Glass Filler: Yes
• Vandal Resistant Bubbler: No
• Filter: Yes