Item # bci2274954

Chicago Faucets Deck Mounted Coil Pre-Rinse Faucet with Lever Handle - Commercial Grade

Model: 919-SLVBABCP

Finish: Choose Finish
  • Chrome
    Special Order

Free Shipping!

Special Order

Product Overview

Product Features:

  • Manufactured and assembled in the United States of America
  • Faucet body and handles are covered under Chicago Faucet’s limited lifetime warranty
  • Constructed of solid brass
  • High quality chrome plated finish – finishes are covered under warranty for a year
  • Single handle operation
  • Spout swivels 360-degrees to allow for unobstructed access to the whole sink
  • Pre-rinse sprayer - commonly used in restaurant applications - makes rinsing dishes or cleaning sink a breeze
  • 44" stainless steel hose provides an extended coverage area to further optimize cleaning process
  • Pre-rinse fitting only - supply valve and handles to be ordered separately
  • Low lead compliant - meeting federal and state regulations for lead content
  • Mounting hardware not included

The Chicago Faucets Benefit

  • Commercial Grade Faucet: When a product is marked as "commercial grade" it means it has been built specifically to stand the test of time, and has been factory tested to function flawlessly through constant and continuous use. It is expected that faucets used in a commerce fashion will see much more use, and inversely abuse than typical faucets you might see in a residential setting, so they are engineered to do just that. Using simple, yet reliable, designs coupled with the industry's highest quality materials these faucets are some of the most reliable on the market. Although they are marketed as being ideal for commercial settings, the savvy home owner might take the quality found here and add a staple of functionality throughout the home as well.

  • ECAST Construction: With the threat of lead pollution in the public’s supply of drinking water, Chicago Faucets was one of the industry’s first to take the lead in finding a solution. These faucets are made of the same durable, high quality materials and fittings as always, however they are manufactured with .25% or less total lead content by weighted average. This means their faucets not only meet the strict guidelines first introduced by states like California and Virginia, but it surpasses those standards, coming as close to truly lead-free as possible.

Product Specifications:

  • Overall Height: 42-1/8" (measured from mounting surface to highest point on the faucet)
  • Spout Height: 13-1/8" (measured from bottom of spout to outlet)
  • Spout Reach: 11-1/2" (measured from center of faucet body to cneter of spout outlet)
  • Required Installation Holes: 1
  • Faucet Centers: 0
  • Flow Rate: 1.0 gallons-per-minute
  • Mounting Configuration: Single hole
  • Rated Operating Pressure: 20-125 PSI
  • Rated Operating Temperature: 40-140 degrees Fahrenheit
  • Coupling nut for 3/8" flexible riser
Codes and Compliances:
  • ASME A112.18.1/CSA B125.1
  • Certified to NSF/ANSI 61, Section 9 by CSA
  • ASTM F2324
  • Vermont Bill S.152
  • Louisiana Low Lead Law HB.471
  • NSF/ANSI 372 Low Lead Content
About Chicago Faucets:
    Chicago Faucets, a member of the Geberit Group, has been a company that the nation has relied on for over a century to craft the highest quality and reliable plumbing products. They offer a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sporting facilities. It is one of the only manufacturers left today that can say they engineer and assemble their faucets in the United States of America. Through constant innovation, such as the patented ECAST material and Quaturn cartridges, Chicago Faucets has not only stayed at the top of the industry, but has revolutionized it in many ways. With a focus in commercial grade faucets they truly exemplify durability and dependability in every one of their products.

      This product is listed under the following manufacturer number(s):

      Dimensions and Measurements

      Faucet Centers
      0 in.
      Flow Rate (GPM)
      42.125 in.
      Hose Length
      44 in.
      Product Weight
      13.15 lbs.
      Spout Height
      13.125 in.
      Spout Reach
      11.5 in.
      Spout Swivel
      360 Degrees
      Water Connection
      Water Pressure (Max)
      125 PSI
      Water Pressure (Min)
      20 PSI

      Included Components

      Drain Assembly Included
      Handles Included
      Hose Included
      Vacuum Breaker
      Valve Included

      Characteristics and Features

      Faucet Holes
      Faucet Type
      Food Service Faucet
      Handle Material
      Handle Style
      Installation Type
      Deck Mounted
      Mounting Type
      Single Hole
      Number Of Handles
      Pre Rinse
      Spout Type
      Valve Type
      Washerless Cartridge

      Warranty and Product Information

      Approved for Commercial Use
      ASME Code
      Country Of Origin
      CSA Code
      Lead Leaching Certified NSF/ANSI 61
      Low Lead Compliant
      Made in America
      Manufacturer Warranty
      Limited Lifetime