Schlage FA358FLO716 Aged Bronze Florence Keyed Entrance Handleset

Item #: BCI492116
Discontinued

We still have product details, accessories, replacement parts and reviews below, scroll down to see them!

Technical Specs

Installation Guide
Specification Sheet
ADA No
ANSI Certification A156.5
BHMA Certification Grade 2
Backset 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
Center to Center 4, 5.5
Collection Florence
Cross Bore 2-1/8"
Cylinder 5 Pin Schlage C
Door Thickness 1-3/4", 1-5/8", 1-7/8", 2"
Function Exterior Entrance Lock, Single Cylinder
Grip Center to Center 9.125
Handle Material Metal
Handle Style Grip
Interior Handle Style Lever
Latch Faceplate Drive-In, Round Corner, Square Corner
Lock Style Single Point
Mount One Piece
Product Class Residential
Series FA-Series
Style Traditional/Classic

Configure your Schlage FA358FLO716 Florence Keyed Entrance Handleset

  • Free Keying Option more info ▼

    Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.


    Please contact customer service for quotes on master keying or to key multiple manufacturers alike.


    Two keys provided per key code.

Discontinued

Please finish configuring above

Single Cylinder Exterior Entrance Lock from the Florence Collection

  • Single cylinder handle set exterior.
  • Latch retracted by thumb piece from out side or by inside knob/lever
  • Triple Option(tm) latches and universal backsets for effortless installation
  • Lifetime Limited Finish and Mechanical Warranties on all handle sets
  • Decorative thumb turn design
  • Concealed mounting screws
  • 3" screws and steel door frame reinforcers; provides maximum protection against violent forced-entry attacks
  • Revolutionary adjustable through-bolt that can move up and down 1-1/2" to fit a variety of pre-existing holes
  • Flush cylinder design
  • Exterior Handleset Dimensions: 17-9/16(H) x 2-7/8"(W) x 3-1/8"(Ext.)
  • Faceplates (Part 16-235): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
  • Strike Plates (Part 10-248): Supplied with a Round Corner Deadbolt Strike (10-094), Square Corner Full Lip Strike Plate and Round Corner Full Lip Strike Plate (10-063) with Dimensions of 2-1/4" x 1-5/8"

Additional Schlage Links

Our SKU: FA358-FLO

This product is listed under the following manufacturer number(s):

  • Aged Bronze*
    FA358FLO716
  • Antique Brass*
    FA358FLO609
  • Antique Pewter*
    FA358FLO620
  • Lifetime Polished Brass*
    FA358FLO505
  • Matte Black*
    FA358FLO622
  • Oil Rubbed Bronze*
    FA358FLO613
  • Polished Brass*
    FA358FLO605
  • Polished Chrome*
    FA358FLO625
  • Satin Bronze*
    FA358FLO612
  • Satin Chrome*
    FA358FLO626
  • Satin Nickel*
    FA358FLO619

*Denotes a finish or option that has been discontinued

8 Questions from the Community

  • The deadbolt of the Schlage FA358-FLO does not unlock when the interior lever is turned.

    Is the deadbolt automatically unlocked when the interior lever is turned?

    A. The deadbolt of the Schlage FA358-FLO does not unlock when the interior lever is turned.

  • The Schlage FA358-FLO can be installed for left handed or right handed applications.

    is this left or right handed or universal?

    A. The Schlage FA358-FLO can be installed for left handed or right handed applications.

  • The Schlage FA358-FLO is 5.25" from centerpoint of the backset to the bottom of the plate.

    what is distance from centerpoint of backset to bottom of plate

    A. The Schlage FA358-FLO is 5.25" from centerpoint of the backset to the bottom of the plate.

  • Schlage only offers one Antique Brass finish, so they should all match even from different collections.

    Do all the schlage antique brass finishes look the same or is it different depending on the style?

    A. Schlage only offers one Antique Brass finish, so they should all match even from different collections.

  • All Schlage products look the same when ordered in the Antique Brass finish.

    Do all the Schlage products that come in antique brass look the same?

    A. All Schlage products look the same when ordered in the Antique Brass finish.

  • The height of the Schlage FA358-FLO is 17-9/16". The projection of the Schlage FA358-FLO is 3-1/8".

    What are the dimensions of the lock (height and width on the door)?

    A. The height of the Schlage FA358-FLO is 17-9/16". The projection of the Schlage FA358-FLO is 3-1/8".

  • The Schlage FA358-FLO is universal LH or RH.

    Is this left handed or right?

    A. The Schlage FA358-FLO is universal LH or RH.

  • The Schlage FA358-FLO from center to center ranges from 8"-9-3/4".

    What is the center to center length of the bolts?

    A. The Schlage FA358-FLO from center to center ranges from 8"-9-3/4".

Product Reviews

Rated 4 out of 5 by from
Date published: 2009-08-03
Rated 5 out of 5 by from Good product/Great Service We needed a replacement front door set and all the local hardware stores no longer carry the 'full inside plate' style, which we needed to cover up existing holes etc. At 1st I special ordered it through Home Depot, then went home and found Handlesets.com who was able to get it to me in 2 days (HomeDepot 10 business days) at almost half the cost. But best of all was the friendly and super helpful service when I had to call in to the 888 number for help, she answered all my questions and knew I was concerned with the delivery speed so she followed up everyday for the 2 days during transportation, and then called me a couple of days after that to make sure we got it installed okay and were happy! Happy . . . YES
Date published: 2011-05-22
Rated 5 out of 5 by from beautiful handle, didn't fit Handle set is beautiful. shipping was good, took a few days. unfortunately didn't fit my predrilled door and had to send it back. returns are a bit of a hassle as it can't all be done on line. we'll see how the return is managed
Date published: 2013-07-30

Schlage FA-Series Collection

Warranty Info

Schlage Warranty

Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty

Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.


Finish Care and Cleaning of External Trim


Finishes: 505 (PVD Bright Brass), 605 (Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.

Finish: 613 (Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.

Finishes: 625 (Bright Chrome), 626 (Satin Chrome)
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.


To make a warranty claim, contact Schlage Customer Service:

United States
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)

Mexico
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866

.

Recently viewed items