Item # bci1346232

Schlage Double Cylinder Camelot Handleset with Jazz Interior Lever from the F-Series

Model: F62CAM609JAZ

$236.60
Finish: Choose Finish
  • Satin Nickel
    Satin Nickel
    $236.60
    Special Order

Special Order
Configure Your Schlage F62-CAM-JAZ Double Cylinder Camelot Handleset with Jazz Interior Lever from the F-Series
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One

Product Overview

Schlage F62-CAM-JAZ Double Cylinder Entrance Handleset with Interior Jazz Lever from the Camelot Collection

  • Camelot double cylinder handle set with Jazz Interior Lever
  • The deadbolt is thrown or retracted by a key from either side.
  • Door latch is retracted by a thumb piece from the outside or by the inside lever
  • Bolt automatically deadlocks when it is fully thrown.
  • Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
  • For Right or Left handed applications
  • Solid Brass Exterior Trim
  • Wrought Brass Interior Trim
  • Lifetime Limited Mechanical and Finish Warranty
  • Exterior Handleset Height: 12-7/8"without the deadbolt
  • Exterior Handle Projection: 2-7/8"
  • Interior Lever Length: 4-9/32"
  • Interior Rose Diameter: 2-3/4"
  • Interior Lever Projection: 2-3/4"
  • Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
  • Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
Center to Center
4, 5.5 in.
Cross Bore
2-1/8"
Door Thickness
1-3/4", 1-5/8", 1-7/8", 2"
Edge Bore
1"
Grip Center to Center
8.5 in.
Handle Projection
2.875 in.
Trim Height
12.875 in.

Included Components

Cylinder Included
Yes

Characteristics and Features

Adjustable Throughbolt
Yes
Cylinder
5 Pin Schlage C
Function
Double Cylinder
Handing
Left, Reversible, Right
Handle Design
Jazz
Handle Material
Metal
Handle Style
Grip
Handleset Design
Camelot
Interior Handle Style
Lever
Keyway
C
Latch Faceplate
Drive-In, Round Corner, Square Corner
Lock Style
Single Point
Mount
Sectional
Shape
Straight
Style
Transitional
Theme
Traditional
Trim Design
Camelot

Warranty and Product Information

ADA
No
ANSI Certification
A156.5
Approved for Commercial Use
No
BHMA Certification
Grade 1
Certifications
ANSI
Collection
Camelot
Series
F-Series