|Country Of Origin||USA|
|Heater Type||Wall Heater|
|Installation Type||Recessed, Surface|
This product has additional required/recommended options. To configure, add to your cart.
Wall Switch Recommended
750/1500W 120Vac - Model 174
Perfect for bathrooms or other areas where you want added warmth on demand. These versatile heaters are factory wired at 500W, 750W, 1000W, 1500W or 2000W, and can be easily converted to alternate-wattage. Also, each model features wattage/voltage options. With such tremendous installation flexibility, you can count on getting a Broan Comfort-Flo Heater that’s precisely what you need for your particular application and room size.
- Factory Wired For 1500W At 120 Vac – Easily Converts To750W At 120Vac Or 1500W At 240Vac
- Clean, White Enamel Finish
- Heavy 20-Gauge Steel; Louvered To Direct Air Downward For Even Room Heating
- Front-Mounted, Built-In Adjustable Thermostat Automatically Maintains Desired Temperature And Features A Color-Coordinated Knob
- 100% Efficient Heating Element Alloy Heating Element Provides Comfortable Heat In Seconds
- Complete Assembly Removes From Housing For Easy Cleaning
- Permanently Lubricated Motor
- Zig-Zag Element Configuration Insulated With Mica
- Manual-Reset Thermal Overload Protection
Additional Broan Links
- View Manufacturer Warranty
- Shop All Broan Products
- Shop All Broan Comfort Flo Collection Products
- Buy Replacement Parts For Broan 174
Our SKU: 174
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
5 Questions from the Community
The Broan 174 when run on a 240V circuit would run at 1500 watts and generate a 5120 BTU.
If it runs at 1500kw, how many btu's does that generate?
A. The Broan 174 when run on a 240V circuit would run at 1500 watts and generate a 5120 BTU.
The Broan 174 can be either recessed or surface mounted.
do i have to cut a hole in the wall or does it in install on the wall?
A. The Broan 174 can be either recessed or surface mounted.
The Broan 174 has the front mounted thermostat and the wall controls are only recommended but not required for this product.
It says it has a front mounted adjustable thermostat, but then recommends a wall control as an sadly purchase. Is this necessary?
A. The Broan 174 has the front mounted thermostat and the wall controls are only recommended but not required for this product.
The cover plate on the Broan 174 is 1 inch bigger than the housing all the way around so this will cover your gap.
This heater will just about fit the existing "hole in the wall" but there will be a slight gap around the grill. Is there available a collar like rim about 1" wide that will fill the gap?
A. The cover plate on the Broan 174 is 1 inch bigger than the housing all the way around so this will cover your gap.
The Broan 174 heater box dimensions are 7-3/4 tall by 10-1/4 from left to right. The depth is 3-3/4". The louvered cover dimensions are 12 inches wide by 9-1/4 inches tall.
What are the dimensions of the heater box? What are the dimensions of the louvered cover? Thanks!
A. The Broan 174 heater box dimensions are 7-3/4 tall by 10-1/4 from left to right. The depth is 3-3/4". The louvered cover dimensions are 12 inches wide by 9-1/4 inches tall.
Broan Comfort Flo Collection
Other Products In The Broan Comfort Flo Collection
Surface Mount Kit for Comfort-Flo Heaters$26.61-$26.61
Wall Heater with Built-In Thermostat, 2000W$112.31-$112.31(4)
Wall Heater Finish Pack with Grille and 1000W Heat...$83.34-$83.34(1)
Comfort-Flo Heater Housing Units (Package of 4)$83.66-$83.66
Wall Heater Finish Pack with Grille and 2000W Heat...$96.35-$96.35
One Year Limited Warranty
Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS AND TUBES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
The duration of an implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE'S OPTION, SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address telephone number below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)