|Collection||Max Steel, Stainless Steel|
Configure your Omnia D12036 US26 SD 10 9/16" Length Modern Flat Lever Single Dummy Entry Set
Handing more info ▼Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
Please finish configuring product before adding to cart
Omnia Style D12036 Single Dummy Latch set.
- Knob Deadbolt Latch set
- 10-9/16" Overall
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Latchsets and Locksets Collection Products
Our SKU: D12036SD
This product is listed under the following manufacturer number(s):
- Oil Rubbed Bronze
D12036 US10B SD
- Polished Brass
D12036 US3 SD
- Polished Chrome
D12036 US26 SD
- Satin Chrome
D12036 US26D SD
- Satin Nickel
D12036 US15 SD
*Denotes a finish or option that has been discontinued
1 Question from the Community
The Omnia D12036SD is pictured with the deadbolt because that is the only image available from Omnia for this model. It is pictured as the single cylinder. The dummy will have a space for the deadbolt, but a decorative plate instead of a key hole. This is a single dummy and only has one side. For the interior, a second one would have to be ordered in the reverse handing.
I'm confused about this handle, because it says it is a dummy but it has a deadbolt. Does this mean it doesn't have hardware for latching on the handle itself, or is it that there is no interior handle included with this? Would the interior have to be ordered separately?
A. The Omnia D12036SD is pictured with the deadbolt because that is the only image available from Omnia for this model. It is pictured as the single cylinder. The dummy will have a space for the deadbolt, but a decorative plate instead of a key hole. This is a single dummy and only has one side. For the interior, a second one would have to be ordered in the reverse handing.
Omnia Latchsets and Locksets Collection
Other Products In The Omnia Latchsets and Locksets Collection
1 3/4" Diameter One Sided Privacy Deadbolt with 1 ...$61.80-$66.00
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.