This product has additional required/recommended options. To configure, add to your cart.
- Toilet Tank Required
Coordinating Complete Toilets:
- 2988.101 - Complete toilet with left-hand tank lever and 12" rough-in
- Fully covered under a 5 year warranty - 5 times the industry standard
- Quick, quiet flushing - American Standard toilets are famously efficient and hushed
- Industry-leading flushing system out-performs older toilets while using less than 1/2 the water
- EverClean porcelain surface is extremely easy to keep clean, including inside the bowl
- Concealed trapway hides the waste chute for an easy-to-clean, streamlined appearance
- PowerWash flushing completely clears the bowl, including under the bowl rim
- Sanitary bar on bowl prevents liquids from traveling under the tank
- Round bowl shape - space saving and more economical than elongated bowls
- Chair-height bowl - easier to sit and stand; appropriate for adults and the elderly
- Perfected porcelain casting process and adjustable tank anchors eliminate "tank wobbles"
- Straight-forward installation instructions are included with each toilet
- 100% factory flush tested - guaranteed to perform
- Includes slow-close toilet seat with push-button removal for easy cleaning
- Wax ring kit (for installation) is not included - when adding to cart, this inexpensive item will be presented
Cadet 3 Flushing:
- 3” flush valve – The flush starts with a flushing system that employs a 3” valve opening, allowing water to enter the bowl at a much faster rate than the industry standard 2” flush valve. Controlled by a flapper that is engineered to be chemical-resistant, the Cadet flushing valve system is highly regarded for its durability.
- 360 degree cleaning – Water entering the bowl does so in a sweeping 360-degree motion. This is designed to help completely clear the bowl, even while using less water.
- Powerful siphoning water jet – A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
- 2-1/8” fully glazed trapway – Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
Other Technologies / Benefits:
- Concealed Trapway – Concealed trapways make a remarkable difference in the pose of a toilet. By covering the waste chute, they streamline the appearance for a look that fits well in both traditional and modern bathrooms. They also serve the functional purpose of eliminating resting spots for hair and dust. Included on the sides are ports (with color-matched caps) to allow access to the floor bolts.
- Everclean Surface – Using the antimicrobial properties of silver (the precious metal), Everclean Surfaces inhibit the growth of bacteria, mold, and mildew. The super smooth, baked-in, mirror-like surface not only eliminates unsightly rings, but also helps repel toilet messes.
- PowerWash Rim – During each flush, a measured amount of water travels within an inner-rim channel to be evenly dispersed throughout the bowl. PowerWash rims are surprisingly good at completely clearing out the bowl after each use.
- Right Height – Right Height bowls lift the sitting-height an additional 1.5 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.
- Slow-Close Seat – Similar to the operation of a seat belt, Slow-Close seats allow users to lift and close the seat normally, with no resistance, but should the seat suddenly drop, a special mechanism “catches” it then slowly closes it. Both the seat and lid have this feature.
- Overall width: 14” (furthest point on the left to the furthest on the right)
- Bowl Height: 16-1/2" (bottom of the base to the rim)
- Rough In: 12" (wall behind toilet to center of waste outlet hole in floor)
- Flush Valve Size: 3" (diameter of the inlet for water entering bowl from tank)
- Trapway Size: 2-1/8" (diameter of the outlet for water/waste exiting the bowl)
- Flow Rate: 1.28 GPF (gallons-per-flush)
- Water Area: 9" X 8" (inner rim dimensions length X width)
- Water Depth (From Rim): 11"
Why Buy American Standard From Us:
- We are an American Standard Preferred Authorized Online Dealer
- We Only Ship Showroom Quality products vs Builder Grade quality found at big box retailers
- All metal parts, not plastic like some of our competitors
- Customer Care Experts Available 7 Days a Week to Serve You Before & After Purchase
- A Showroom Experience from the Comfort of Your Home or Office
This product is listed under the following manufacturer number(s):
Dimensions and Measurements
Characteristics and Features
Warranty and Product Information
American Standard Cadet 3 Review
Join Milan Rosan and Build.com as he shows us the features and benefits of the American Standard Cadet 3 Line of Toilets