|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Center to Center||5.5|
|Cross Bore||1-5/8", 2-1/8"|
|Door Thickness||1-3/4", 1-7/8", 2"|
|Grip Center to Center||9.25|
|Handing||Left, Reversible, Right|
|Interior Handle Style||Knob|
|Latch Faceplate||Round Corner, Square Corner|
|Lock Style||Single Point|
|Manufacturer Warranty||Limited Lifetime|
Configure your Weslock 06641-N--002D Philbrook Series Single Cylinder Handleset from the Elegance Collection
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Please finish configuring product before adding to cart
This product has additional required/recommended options. To configure, add to your cart.
Interior Handle Required
The Elegance Collection by Weslock lies perfectly at the intersection of form and function. The quality of these handlesets will have you at ease knowing you can enjoy this great look for years to come.
- Left or right handing
- Simple and quick installation will have your home looking beautiful in no time
- Heavy duty security strikes with 3" screws
- Round and square latch faceplates
- Limited lifetime mechanical and finish warranty
- Beautiful designs and finishes to match the look and style of any home
Keyed Entry (Single Cylinder) Exterior Only Function: Weslock exterior only single cylinder handlesets feature the exterior trim of a working mechanical lock set, and require an associated interior pack for full installation. Single cylinder handlesets lock and unlock from the exterior with a key, and from the interior with an associated thumb turn.
- Backset: 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
- Center to Center: 5-1/2"
- Cross Bore: 1-5/8", 2-1/8"
- Cylinder: 5 Pin
- Door Thickness: 1-3/4", 1-7/8", 2"
- Edge Bore: 1"
- Handing: Left, Reversible, Right
- Latch Faceplate: Round Corner, Square Corner
- Projection: 2-3/4"
- Length: 18-3/4"
- Width: 2-3/4"
- 6641 (This Model): Single Cylinder
- 6641DC: Double Cylinder
- 6645: Single Dummy
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Weslock hardware is well built, and designed to last through years of use.
Additional Weslock Links
Our SKU: 6641
This product is listed under the following manufacturer number(s):
- Oil Rubbed Bronze
- Satin Nickel
*Denotes a finish or option that has been discontinued
4 Questions from the Community
5 1/2 inch centers are the industry standard now. The 6641 also has 5.5 inch centers, so if you measured 5 inches, then that is not going to work for you. The Baldwin minimum measurement is 4 3/8 inches, so anything greater than that (i.e. 5) will work.
I am replacing an old Weslock handleset that I measured at 5" center to center spacing on the bore holes. I get the same 5" when I measure at the latch plate between deadbolt and door latch. Did the standard spacing change over the last 13 years or am I missing something? Will this handleset fit or should I replace with a separate deadbolt/handle set such as the Baldwin 85315? Thanks, Richard Aycock
A. 5 1/2 inch centers are the industry standard now. The 6641 also has 5.5 inch centers, so if you measured 5 inches, then that is not going to work for you. The Baldwin minimum measurement is 4 3/8 inches, so anything greater than that (i.e. 5) will work.
The Weslock 6641 has an ANSI grade of 2. Please let me know if I can be of any further assistance. Thank you.
what is the ANSI Grade on this lock?
A. The Weslock 6641 has an ANSI grade of 2. Please let me know if I can be of any further assistance. Thank you.
The Weslock 6641 Elegance Handleset can be used with a door thickness of 1-3/4" to 2".
can I use this set on a 2 1/4" thick door?
A. The Weslock 6641 Elegance Handleset can be used with a door thickness of 1-3/4" to 2".
The Weslock 6641 requires 2 holes to be drilled. One for the lower latch on the handle & one for the deadbolt above it. Because this is a full plate the holes must be 5.5" apart center to center for proper installation.
Where will the hole in the door be located? Will the hole be where the bolt is, or where the knob is, or both spots?s?
A. The Weslock 6641 requires 2 holes to be drilled. One for the lower latch on the handle & one for the deadbolt above it. Because this is a full plate the holes must be 5.5" apart center to center for proper installation.
Weslock Philbrook Collection
Other Products In The Weslock Philbrook Collection
Philbrook Series Dummy Handleset from the Elegance...$139.80-$139.80
Philbrook Series Double Cylinder Handleset from th...$139.80-$139.80(3)
Warranties cover the original residential user of Weslock® Products against defects in material and workmanship as long as the original user occupies the residential premises upon which the product was originally installed. This warranty DOES NOT COVER abused or misused products or if a Weslock® Product is used in commercial applications. Upon return of a defective Product to Weslock®, Weslock® shall either repair or replace the Product. Or upon written approval from Weslock® we may refund up to 50% of the purchase price of the product when the defective product and the original cash receipt of the Weslock® product is sent to Weslock®. Weslock® is not responsible for the cost to install the product or any defects caused by incorrect installation.
Please allow 4 to 6 weeks for warranty work or refund.
A finish deterioration occurring from the use or paints, solvents, or other chemicals is not a defect in the finish and is not covered by this warranty. Weslock® is not liable for incidental or consequential damages. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific c legal rights and you may also have other rights that vary from state to state.
THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES SHALL BE LIMITED TO THE DURATION OF THE WARRANTY PERIOD OF THESE EXPRESS WARRANTIES. WESLOCK® SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR REPAIRS BY THIRD PARTIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY. THESE WARRANTIES GIVE YOU SPECIAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE.