|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Center to Center||5.5|
|Door Thickness||1-3/4", 1-7/8", 2"|
|Grip Center to Center||9.25|
|Interior Handle Style||Knob|
|Latch Faceplate||Round Corner, Square Corner|
|Lock Style||Single Point|
Configure your Philbrook Single Cylinder Entry Handleset from the Elegance, Philbrook Collection
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Finish configuring above to see price
Please finish configuring above
This product has additional required/recommended options. To configure, add to your cart.
Interior Handle Required
Weslock 6641 Philbrook Single Cylinder Entry Handleset from the Elegance, Philbrook Collection
The single cylinder entry function features a single cylinder deadbolt which requires a key to lock and unlock from the exterior and a thumb turn to lock and unlock from the interior. Weslock has recently updated their ordering process. You must select the exterior handle (such as this product) then the interior handle (kit/interior pack) which will be presented to you as you add this item to the cart. Interior Packs are required for installation.
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are they strong and long lasting, but Weslock hardware is well built for years of use in the home. The family minded mechanism is also easy to activate and simple for small children to operate. Weslock is high style as well as security and safety. The designs enhance the image of your home and the details such as concealed installation screws have a finished look unlike all others.
- Exceeds ANSI A 156.2 Grade II Lock Standards
- Solid Brass
- Single Cylinder uses a Key from the Exterior and a thumb turn from the Interior for Locking and Unlocking
- 1" Throw Bolt with Two Hardened Steel Rollers Prevent Sawing
- Removable Door Knob/Lever Prevents Scratching During Installation
- Heavy Duty Security Strikes with 3" Screws
- Fits Doors Prepared with 2-1/8" Top (1-5/8" Optional) and 2-1/8" Bottom Cross Holes and 1" Edge Hole
- 5-1/2" Minimum Center to Center Cross Hole Spacing
- Adjustable Latches 2-3/8" or 2-3/4" with Removable Faceplates
- Optional Door Thickness up to 2-1/4" (Item# 00905)
- Adjusts to Door Thickness from 1-3/4" - 2"
- Limited Lifetime Mechanical Warranty
- Limited 10 Year Finish Warranty
Additional Weslock Links
Our SKU: 6641
This product is listed under the following manufacturer number(s):
Oil Rubbed Bronze
*Denotes a finish or option that has been discontinued
4 Questions from the Community
I am replacing an old Weslock handleset that I measured at 5" center to center spacing on the bore holes. I get the same 5" when I measure at the latch plate between deadbolt and door latch. Did the standard spacing change over the last 13 years or am I missing something? Will this handleset fit or should I replace with a separate deadbolt/handle set such as the Baldwin 85315? Thanks, Richard Aycock
A. 5 1/2 inch centers are the industry standard now. The 6641 also has 5.5 inch centers, so if you measured 5 inches, then that is not going to work for you. The Baldwin minimum measurement is 4 3/8 inches, so anything greater than that (i.e. 5) will work.
can I use this set on a 2 1/4" thick door?
what is the ANSI Grade on this lock?
I am wondering where the hole in the door is going to be located, I am trying to cover an existing hole above my orginal door knob. Will the hole be where the bolt is, or where the knob is, or both spots?
Weslock Philbrook Collection
Other Products In The Weslock Philbrook Collection
Warranties cover the original residential user of Weslock® Products against defects in material and workmanship as long as the original user occupies the residential premises upon which the product was originally installed. This warranty DOES NOT COVER abused or misused products or if a Weslock® Product is used in commercial applications. Upon return of a defective Product to Weslock®, Weslock® shall either repair or replace the Product. Or upon written approval from Weslock® we may refund up to 50% of the purchase price of the product when the defective product and the original cash receipt of the Weslock® product is sent to Weslock®. Weslock® is not responsible for the cost to install the product or any defects caused by incorrect installation.
Please allow 4 to 6 weeks for warranty work or refund.
A finish deterioration occurring from the use or paints, solvents, or other chemicals is not a defect in the finish and is not covered by this warranty. Weslock® is not liable for incidental or consequential damages. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific c legal rights and you may also have other rights that vary from state to state.
THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES SHALL BE LIMITED TO THE DURATION OF THE WARRANTY PERIOD OF THESE EXPRESS WARRANTIES. WESLOCK® SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR REPAIRS BY THIRD PARTIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY. THESE WARRANTIES GIVE YOU SPECIAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE.