American Made Luxury Kitchen Faucets by Waterstone
Every kitchen needs accessories to enhance the functionality of the kitchen faucet. All accessories from Waterstone are constructed of solid brass and come in 30 different unique finishes. Waterstone’s Contemporary accessories are designed to match the Fulton, Hunley, and Parache faucet suites.
All Waterstone faucets are built in the USA using 100% American components and materials.
Waterstone 3030 Features:
- Designed, Engineered and Made in the USA
- Dual Port Dishwasher Airgap
- Cover Made from Solid Brass or Stainless Steel
- Adapters for RO Port or 2nd Dishwasher Included
- Hides Upper Nut and Washer Edges
- Recommended Hole Size 1-1/2"
Waterstone 3030 Specifications:
- Height: 3.25"
- Width: 2.25"
- Max Deck Thickness: 1.25"
Antique Bronze, Black Oil Rubbed Bronze, Caribbean Bronze, Tuscan Brass, Weathered Brass, and Weathered Copper are LIVING FINISHES. Generally, finishes darken slightly where they are not being touched and highlight where the high use points are. Living finishes have no protective coatings and are more easily scratched or scuffed.
Additional Waterstone Links
- View Manufacturer Warranty
- Shop All Waterstone Products
- Shop All Waterstone Contemporary Collection Products
Our SKU: 3030
This product is listed under the following manufacturer number(s):
Black Oil Rubbed Bronze
Distressed American Bronze
Distressed Antique Brass
Distressed Antique Copper
Distressed Antique Pewter
Black Oil Rubbed Bronze
Solid Stainless Steel
*Denotes a finish or option that has been discontinued
Waterstone Contemporary Collection
Other Products In The Waterstone Contemporary Collection
Contemporary Air Switch Deck Mount
Contemporary Air Gap Single Port
Contemporary Soap Dispenser Deck Mount
Contemporary Side Spray
Contemporary Escutcheon Plate
All Waterstone, LLC products carry a LIMITED LIFETIME GUARANTEE against defect in material or workmanship. Waterstone does not, however, guarantee its products against defects due to improper installation, the failure to perform proper maintenance or uses for which they were not designed. Waterstone has no liability for consequential or indirect damages and its only liability is to repair or replace, at its option, any of its products determined by Waterstone to have a manufacturing defect. Products must be returned within one year of purchase. Waterstone shall not pay any repair costs performed on its products by other than its authorized representatives unless Waterstone has given prior written approval to incur costs on its behalf. The rate of deterioration of finishes will vary either from exposure to chemicals, perspiration, climate conditions, or other factors. Tarnishing or excessive wear of finishes is therefore, not a defect, but a normal process which is unavoidable. Under these circumstances, finishes can not be guaranteed and, therefore, products will not be repaired or replaced under warranty for normal tarnishing or wear finishes.