|Country Of Origin||USA|
|Made in America||Yes|
Multi Stage Water Filtration Unit
Waterstone 30101 Features:
- Designed, Engineered and Made in the USA
- Replacement Filters: 30102 and 30102-2 (2 Pack)
- 1000 Gallon Filtration System
- Single Cartridge Multi Stage Filter
- For Municipal Potable Feed Water Use Only
- Feed Water Press Range: 40 PSI to 100 PSI Max
- Feed Water Temperature Range: 32F to 120F Max
- Includes Attachment Tubing Already Connected
- Made to Work with WS-300 Safety Valve
Waterstone 30101 Specifications:
- Height: 15.5"
- Width: 7"
- Length: 6.25"
Additional Waterstone Links
Our SKU: 30101
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
2 Questions from the Community
The Waterstone 30101 is rated for a 1000-gallon life, which is approximately one year of average use.
How frequently should the filter be replaced?
A. The Waterstone 30101 is rated for a 1000-gallon life, which is approximately one year of average use.
The Waterstone 30101 is a 1/2" connection.
what size is the water connection?
A. The Waterstone 30101 is a 1/2" connection.
All Waterstone, LLC products carry a LIMITED LIFETIME GUARANTEE against defect in material or workmanship. Waterstone does not, however, guarantee its products against defects due to improper installation, the failure to perform proper maintenance or uses for which they were not designed. Waterstone has no liability for consequential or indirect damages and its only liability is to repair or replace, at its option, any of its products determined by Waterstone to have a manufacturing defect. Products must be returned within one year of purchase. Waterstone shall not pay any repair costs performed on its products by other than its authorized representatives unless Waterstone has given prior written approval to incur costs on its behalf. The rate of deterioration of finishes will vary either from exposure to chemicals, perspiration, climate conditions, or other factors. Tarnishing or excessive wear of finishes is therefore, not a defect, but a normal process which is unavoidable. Under these circumstances, finishes can not be guaranteed and, therefore, products will not be repaired or replaced under warranty for normal tarnishing or wear finishes.