We still have product details, accessories, and reviews below, scroll down to see them!
|Bulb Base||Medium (E26)|
|Bulb Type||Compact Fluorescent, Incandescent|
|Light Direction||Ambient Lighting|
|Number of Bulbs||4|
|Suggested Room Fit||Bathroom|
|Watts Per Bulb||75|
Configure your Functional 24" Wide Bathroom Fixture
Finish configuring above to see price
Please finish configuring above
- Four-light wall bracket with white bent glass shade. K.O. for G.C.O.
- Extends 5.5" from the wall
- Height from the center of the outlet box 2.75"
- Requires 4 Medium base 75W max bulbs (not included)
Additional Thomas Lighting Links
- View Manufacturer Warranty
- Shop All Thomas Lighting Products
- Shop All Thomas Lighting None Collection Products
Our SKU: SL285
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
9 Questions from the Community
How wide is the box behind the light...is it at least 13 inches?
How far apart are the screws?
is there a switch built into this unit?
do you have the replacement shade for the thomas lighting SL285
can I place a energy star light bulb
Is it possible to get a replacement for the cover that goes over the bulbs?
Can it be hung horizontally or vertically?
Can you use compact florescent bulbs in this fixture>
Is the shade glass or plastic?
Thomas Lighting None Collection
Other Products In The Thomas Lighting None Collection
Thomas Lighting SL8298
Transitional Single Light Down Lighting Mini Pendant
Thomas Lighting SL8003
Traditional / Classic Five Light Up Lighting Chandelier
Thomas Lighting SL8783
Three Light Flush Mount Ceiling Fixture
Thomas Lighting SL8781
Single Light Flush Mount Ceiling Fixture
Thomas Lighting SL8782
Two Light Flush Mount Ceiling Fixture
Thomas products, when properly installed and under normal conditions of use, are warranted only to Thomas’ direct customers to be free from defects in material and workmanship at time of shipment. (Thomas does not warrant ballasts supplied with fluorescent units. The ballast manufacturer’s warranty, if any, must be consulted.) All warranty claims must be asserted within one year from date of receipt of the subject item; thereafter warranty claims will not be honored. Customer’s exclusive remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to be defective in material or workmanship at time of shipment, and only if the claim is asserted during said one-year period. Thomas’ sole and maximum liability for a defective product shall never exceed the cost of the subject product. Except for such warranty and remedy as stated (and the express warranty of title), THOMAS DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICLULAR PURPOASE. IN NO EVENT SHALL THOMAS BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE THOMAS PRODUCTS, BEYOND THE COST TO THE CUATOMER OF THE SUBJECT PRODUCT OR PRODUCTS. THEREFORE, THE CUSTOMER’S SLE AND EXCLUSIVE REMEDY AGAINST THOMAS FOR BREACH O FWARRANTY, BREACH OF CONTRACT, OR IN NEGLIGENCE OR STRICT LIABILITY OR OTHERWISE SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE SUBJECT PRODUCT AT THOMAS’ OPTION (EXCLUDING INSTALLATION AND REMOVAL CHARGES WHICH SHALL NOT BE THOMAS’ LIABILITY) OR, IF THOMAS CHOOSES, REFUND OF THE PURCHASE PRICE AND SUCH EXLUSIVE REMEDY SHALL EXPIRE ONE YEAR FROM THE SHIPMENT OF THE GOODS.
In no case does the Thomas warranty and remedy extend to anybody other than Thomas direct customers unless Thomas packs a warranty card with the product, which states otherwise. Except for such pre-packed warranty card statements, if any, customer is not authorized to extend warranties on Thomas’ behalf to anyone. Such unauthorized extensions of warranties by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of Thomas products for customer’s use or resale, or for incorporating them into object or for applications which customer designs, assembles, constructs or manufacturers.