Swanstone DIT-S018 Bisque Veritek Single Basin Laundry Tub 17.25" W x 20" D

Item #: BCI294879
$241.87
Originally $120.00, You Save -102%
Shipping: Free Shipping! See Details
Ships In:
Availability based on Finish selected
Finish:
Bisque
Stock:
10 In Stock
Quantity:
 

Discontinued

Please finish configuring above

Technical Specs

Specification Sheet
Installation Guide
Basin Depth 10.25
Basin Length 14
Basin Width 14
Capacity (Gallons) 7
Height 10.25
Installation Type Drop In
Length 20
Material Acrylic
Number Of Basins 1
Sink Shape Rectangular
Width 17.25

Veritek Single Basin Laundry Tub 17.25" W x 20" D

When it’s time to get busy, Swan’s utility products and accessories are ready to go to work. Our selection of laundry tubs, service sinks and shower cabinets offer you solutions that are strong, practical and performance-minded.

Veritek is Swanstone’s affordable compression-molded material with no surface coating to chop or crack. This non-porous material will not mold or mildew, so it is perfect for your bath, laundry and utility rooms. Choose from bathtubs, bath and shower walls, shower floors and utility sinks and basins. Veritek products are covered with the industry’s best warranties.

Swanstone DIT-S Features:

  • Made of sturdy Veritek with no surface coating to chip or crack
  • Will not mold or mildew
  • Flat deck allows for variety of faucet applications
  • Installs into countertop for an upgrade laundry room look
  • Available in solid and limited aggregate colors
  • 7 gallon capacity

Additional Swanstone Links

Our SKU: DIT-S

This product is listed under the following manufacturer number(s):

  • Bisque
    DIT-S018
  • Bone
    DIT-S037
  • Gray Granite
    DS20000042
  • Tahiti Desert
    DIT-S050
  • White
    DIT-S010

*Denotes a finish or option that has been discontinued

9 Questions from the Community

  • The Swanstone DIT-S is a drop in and does not include the legs.

    Does this come with "legs" as well?

    A. The Swanstone DIT-S is a drop in and does not include the legs.

  • The Swanstone DIT-S can be cleaned with powdered abrasive cleaners. Use of a Scotch-Brite pad is recommended to remove stubborn stains. Occasional use of a mild bleach and water solution ensures that the original luster is maintained.

    How do I clean it? Is it OK to use scouring powder?

    A. The Swanstone DIT-S can be cleaned with powdered abrasive cleaners. Use of a Scotch-Brite pad is recommended to remove stubborn stains. Occasional use of a mild bleach and water solution ensures that the original luster is maintained.

  • The Swanstone DIT-S does not come pre-drilled.

    is this sink pre-drilled for a faucet?

    A. The Swanstone DIT-S does not come pre-drilled.

  • The Swanstone DIT-S has the following dimensions, 17.25"w X 20" X 10.25"h.

    17.5" X 20 X ???

    A. The Swanstone DIT-S has the following dimensions, 17.25"w X 20" X 10.25"h.

  • The Swanstone DIT-S is a drop in sink. It does have a flat deck so i dont see why it couldnt be though

    Can this sink be undermounted to be used with granite countertop?

    A. The Swanstone DIT-S is a drop in sink. It does have a flat deck so i dont see why it couldnt be though

  • Basin Depth 10.2500, Basin Length 14.0000, Basin Width 14.0000, Capacity (Gallons) 7.0000

    how deep are these sinks on the inside?

    A. Basin Depth 10.2500, Basin Length 14.0000, Basin Width 14.0000, Capacity (Gallons) 7.0000

  • The Moen 22036 would work for you. The drain is 3 1/2" which is very common size.

    What drain assembly do you recommend? The installation instructions say that one is not included.

    A. The Moen 22036 would work for you. The drain is 3 1/2" which is very common size.

  • The Swanstone DIT-S does not come pre drilled. You will be able to drill a faucet hole for the Danze D455158. Also, the Danze faucet does have a 10" spout reach. That means it will reach to about the center of the sink.

    Would the Danze D455158 faucet work with this sink?

    A. The Swanstone DIT-S does not come pre drilled. You will be able to drill a faucet hole for the Danze D455158. Also, the Danze faucet does have a 10" spout reach. That means it will reach to about the center of the sink.

  • When drilling Veritek, they are marked from underneath. You will start underneath until the pilot bit pops through, then switch to the top and finish the drill. 

    Do any special precautions need to be taken when drilling veritek?

    A.

    When drilling Veritek, they are marked from underneath. You will start underneath until the pilot bit pops through, then switch to the top and finish the drill. 

Product Reviews

Rated 5 out of 5 by from Great price and easy to install
Date published: 2010-07-23
Rated 5 out of 5 by from non standard size I needed a laundry tub to fit in a cabinet with less than 25" depth. This fits the bill well at a reasonable price.
Date published: 2011-08-26

Swanstone

Swanstone Corporate Statement For more than four decades, we have been a quiet leader in the kitchen and bath industry. Our high-quality products have always balanced durability, value and style. Innovation is one of our core values, and we have set a standard with our ability to invent. Now it's time to reinvent. The Swan Story For more than 40 years, we've been creating innovative and affordable solid surface products and materials for customers all over the world. It started in 1964, when we introduced the Swan Shell Shower, a doorless, shell-shaped shower that captured the spirit of its time. The Shell Shower was the first in a long line of original kitchen and bath products from Swan, including the Circle Shower as well as the industry's first non-ceramic tile bathtub wall system. In 1987, we introduced Swanstone to the world, first with a line of vanity tops and bowls. Swanstone quickly became known for its superior impact strength, heat resistance, and ability to resist scratches and stains. Consumers now had an elegant and durable solid surface material that was also affordable. Since then, our Swanstone line has expanded to include a wide variety of kitchen sinks, countertops, tub and shower walls, and more. In 1994 we introduced the Swanstone 1/4" sheet program, offering even more flexibility to Swanstone customers. In 1997 we introduced a complete line of Swanstone products for the restaurant industry, including tabletops, countertops, vanity tops, mop service sinks and windowsills. At Swan, we're committed to a policy of continuous improvement, to providing our customers with the highest quality products and most responsive customer service in the kitchen & bath industry. And we stand behind this commitment with some of the best warranties in the business. Made in America The Swan Corporation is headquartered in St. Louis, Missouri, with manufacturing facilities in Centralia, Illinois. We proudly manufacture all products made from these material systems in the USA. Swanstone Veritek Swan High-Gloss

Swanstone Utility Tubs Collection

Other Products In The Swanstone Utility Tubs Collection

Warranty Info

Recently viewed items