Stiebel Eltron Mini 3 110 Volt Electric Tankless Water Heater For Light Use
BCI1289799
Compare Our Prices
Technical Specs
| Specification Sheet | |
| Amperage | 25 |
| Approved for Commercial Use | Yes |
| Collection | Mini |
| Depth | 3.25 |
| Direct Vent | No |
| Hardwired | Yes |
| Height | 6.50 |
| Ignition Type | Electronic |
| Indoor Installation | Yes |
| Kilowatts | 3 |
| Manifolding | No |
| Outdoor Installation | No |
| Plug In | No |
| Product Weight | 3.44 |
| Theme | Point-of-Use |
| Voltage | 110 |
| Water Connection | 1/2" |
| Water Pressure (Max) | 150 |
| Width | 7.5 |
This product has additional required/recommended options. To configure, add to your cart.
-
Descaling Kit Recommended
-
Isolation Valve Recommended
110V Electric Tankless Tankless Water Heater For Single Faucet
The Stiebel Eltron Mini(tm) tankless water heaters are designed for installation at the point-of-use. The Mini(tm) heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini(tm) water heaters are equipped with a safety high-limit with manual reset. The combination of meticulous German engineering and the best available materials ensure that every Mini(tm) is of the highest quality and designed for many years of trouble-free service.
The Mini(tm) 3, and Mini(tm) 4 models ship with a 0.5 GPM pressure compensating flow reducer / aerator that fits most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve* (Except in MA), drains, or circulating pumps are needed.
- Office Buildings
- Gas Stations
- Stores
- Schools
- Malls
- Hotels / Motels
- Warehouses
- Commercial Condominiums
- Restaurants
- Bathroom Sinks
- Kitchen Sinks
- Laundry Areas
- Small Cabins
- Boats / RVs
- Made in the USA
- 3 Year Warranty
- 40 Degree Rise at 0.5 GPM (Continuous Hot Water for One Faucet)
- Compact, Space Saving Design
- Attractive, High-Impact Polycarbonate Housing
- Standard 9/16" Water Connections
- Safety High-Limit Automatic Shutoff (Manual Reset)
- 110-120 Volt
- 3 Kilowatts/ hour
- 25 Amps
- .36 Gallon Flow to Actuate Unit
- 3.4 lbs (weight)
- For additional and detailed specifications, please see the specification sheet
Additional Stiebel Eltron Links
- Shop All Stiebel Eltron Products
- Shop All Stiebel Eltron Mini Collection Products
Our SKU: Mini 3
This product is listed under the following manufacturer number(s):
- Mini3
Electric
*Denotes a finish or option that has been discontinued
4 Questions from the Community
-
My kitchen sink is on the opposite side of our house as our regular water heater so heating water in the sink can take 10 minutes sometimes. Can this unit be connected to a hot water line to solve that problem?
-
Do you have a plug in heater or is this hard wired?
-
Can this unit be used for a clothes washing maching?
A. The Stiebel Eltron Mini 3 is be sure you have a #10 wire connection. Also you must determine the gallons per minute of your washer machine. The delivery rate is important. This will deliver a 32 degree temp raise @ a rate of a half a gallon per minute.
-
On average, how much hot water does a shower use per minute, (GPM)?
