Soler & Palau TD 6"/150MM Inline Mixed Flow Duct Fan
The S&P TD-MIXVENT series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes. This makes the TD-MIXVENT series the ultimate solution for small to medium sized ventilation installations which require a high airflow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cabinets and many other limited space environments.
- Polypropylene housing.
- ABS fan blades.
- Thermal link via fuse.
- Permanently lubricated ball bearings.
- Speed controllable 2-speed motor.
- Independently safety tested by Underwriters Laboratories, Inc. and are UL and cUL Listed.
Additional Soler and Palau Links
Our SKU: TD-150
This product is listed under the following manufacturer number(s):
Off-White Reinforced Plastic
*Denotes a finish or option that has been discontinued
7 Questions from the Community
voltage of td-150 inlineductfan
Are these fans rated for kitchen range hood exhaust? Also, can these be used in both kitchens and bathrooms?
A. The Soler and Palau TD-150 can be used in a kitchen range hood and can also be used in a bathroom. When installed in a range hood, Soler and Palau recommend installing the fan at least 5' above the cooking surface and also recommend using a grease filter in conjunction with the fan for maximum product life and performance.
I am looking at a TD-150 to replace a DB2 duct fan used for crawl space ventilation. Only need to move about 200cf of air, and it is on a timer to run 1 hour three times a day. Would this be a sutable replacement in a 6" duct? The fans used for Radon are all vertical mounts, whereas this one can be horizontal--which is what I need.
I've read that these units do NOT come with a power cord and need to be purchased separately. Is this true, and if so what do I need to make this plug&play?
Can this be run on a dimmer switch for infinite speed varibility?
I need to control cfm from a minimum of 160 cfm up to 290+- . Can this be accomplisehd with this unit? also , drawing heat from ceiling down approx 18' to floor. Any thoughts appreciated. Require 3 units for the job. accomplished using this unit
Does Soler and Palau provide a mounting bracket for this unit?
Soler and Palau TD Collection
Other Products In The Soler and Palau TD Collection
Soler and Palau TD-100X
4"/100MM Inline Mixed Flow Duct Fan
Soler and Palau TD-150S
Soler & Palau TD-SILENT 6"/150MM Low Profile Inline Mixed Flow Duct Fan
Soler and Palau TD-250
10"/250MM Inline Mixed Flow Duct Fan
Soler and Palau TD-125
5"/125MM Inline Mixed Flow Duct Fan
Soler and Palau TD-315
12.4"/315MM Inline Mixed Flow Duct Fan
Soler and Palau
Warranty varies by product, please check the manufacturer website for more details.