|BHMA Certification||Grade 2|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Collection||Accent, Camelot, Electronic Security|
|Cylinder||5 Pin Schlage C|
|Cylinder Type||Single Cylinder|
|Door Thickness||1-1/2", 1-3/4", 1-3/8", 1-5/8"|
|Function||Keypad Entry with Auto-Lock, Single Cylinder|
|Handing||Left, Reversible, Right|
|Interior Handle Style||Lever|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Number of Codes||19|
Configure your Schlage FE575CAM609ACC Camelot Keypad Entry with Auto-Lock Door Lever Set with Accent Interior Lever
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Please finish configuring above
- BHMA Grade 2 security.
- Reversible lever, installs on left or right-handed doors.
- Ideal for utility closets, storage rooms, basement stairways, cleaning supply closets, etc.
- Limited lifetime mechanical and finish warranty. 1 year limited electronics warranty.
- Faceplate (Part 16-211): Supplied with 1/4" round corner, square corner and drive-in faceplates.
- Strike Plates (Part 10-063): Supplied with square corner and round corner full lip strike plates (dimensions: 2-1/4" x 1-5/8"
Keypad Entry with Auto-Lock:
- Automatically relocks after 5 seconds; no need to remember to relock the door.
- Provides additional layers of keyless security & safety inside your home or office.
- Easily replace most existing locks with a screwdriver in about 30 minutes.
- No programming required; preset with two user codes so it's ready to use right out of the box.
- Backset: 2-3/8" or 2-3/4", Adjustable
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" Through 1-3/4"
- Handing: Left, Right, Reversible
- 5 Pin Schlage C Keyway Cylinder
Additional Schlage Links
Our SKU: FE575-CAM-ACC
This product is listed under the following manufacturer number(s):
- Aged Bronze
- Antique Brass
- Antique Pewter
- Lifetime Polished Brass
- Oil Rubbed Bronze
- Polished Chrome
- Satin Chrome
- Satin Nickel
*Denotes a finish or option that has been discontinued
10 Questions from the Community
Schlage does not make a version of the FE575-CAM-ACC specifically for mobile homes, but if the backset and door thickness of your door match those of a standard door, (2-3/8" or 2-3/4" backset, and a thickness of between 1-3/8" and 1-3/4",) this will work for you.
do you have any for mobile homes only ???
A. Schlage does not make a version of the FE575-CAM-ACC specifically for mobile homes, but if the backset and door thickness of your door match those of a standard door, (2-3/8" or 2-3/4" backset, and a thickness of between 1-3/8" and 1-3/4",) this will work for you.
The Schlage FE575-CAM-ACC and BE365 would best fit 5.5" centers on the bore holes of the door.
What distance do you need between the hole centers on a FE575-cam-acc and BE365?
A. The Schlage FE575-CAM-ACC and BE365 would best fit 5.5" centers on the bore holes of the door.
You are able to change the passwords on the Schlage FE575-CAM-ACC easily. Page 5 of the Installation Guide shows how to change, delete and add new passwords.
can I change passwords when ever I want or does it stay with the factory preset codes two of them from what I read?
A. You are able to change the passwords on the Schlage FE575-CAM-ACC easily. Page 5 of the Installation Guide shows how to change, delete and add new passwords.
The Schlage FE575-CAM-ACC is reset to factory settings by disconnecting the battery, pressing Schlage, reconnecting the battery, and holding down the Schlage button.
For more programming instructions see page 5 of the instructions below:
how do you reset the lock?
A. The Schlage FE575-CAM-ACC is reset to factory settings by disconnecting the battery, pressing Schlage, reconnecting the battery, and holding down the Schlage button.
For more programming instructions see page 5 of the instructions below:
The Schlage FE575-CAM-ACC can either be set up to auto lock behind you after 5 seconds or that function can be turned off but unfortunately there is no way to select the amount of time that it will take before it closes.
Can the door be programmed not to lock until you ask it to lock or does it always auto lock?
A. The Schlage FE575-CAM-ACC can either be set up to auto lock behind you after 5 seconds or that function can be turned off but unfortunately there is no way to select the amount of time that it will take before it closes.
The Schlage FE575-CAM-ACC will work fine on a double front door.
could l use the Schlage FE575-CAM-ACC in my double front door? or do l need a special door handle
A. The Schlage FE575-CAM-ACC will work fine on a double front door.
The Schlage FE575-CAM-ACC is, unfortunately, only going to be able to be adjusted to 2 3/4" or 2 3/8" backset. Schlage products are not able to be adjusted to 2 1/2" backset.
My backset dimension is 2-1/2 "... It says this is adjustable, but it says 2-3/8" OR 2-3/4", not 2-3/8" TO 2-3/4"... so, can I set this at 2-1/2"??... or does it only have 2 settings?
A. The Schlage FE575-CAM-ACC is, unfortunately, only going to be able to be adjusted to 2 3/4" or 2 3/8" backset. Schlage products are not able to be adjusted to 2 1/2" backset.
The Schlage FE575-CAM-ACC has a version with the Flair levers. It is model FE575-PLY-FLA.
Is it possible to replace the levers on this model with the flair levers in the same finish?
A. The Schlage FE575-CAM-ACC has a version with the Flair levers. It is model FE575-PLY-FLA.
The Schlage FE575-CAM-ACC does not come with a deadbolt.
Does it come with a deadbolt?
A. The Schlage FE575-CAM-ACC does not come with a deadbolt.
The Schlage FE575-CAM-ACC can be opened with a key.
Can this also be opened with a key?
A. The Schlage FE575-CAM-ACC can be opened with a key.
Schlage Camelot Collection
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
(PVD Bright Brass), 605
(Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique
Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
(Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.
(Bright Chrome), 626
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866