Compare Our Prices
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|BHMA Certification||Grade 1|
|Cylinder||5 Pin Schlage C|
|Door Thickness||1-3/4", 1-5/8", 1-7/8", 2"|
|Function||Single Cylinder, Single Cylinder Handleset|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Lock Style||Single Point|
|Style||Contemporary / Modern|
Configure your Century Single Cylinder Exterior Entrance Handleset from the F-Series
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Finish configuring above to see price
Please finish configuring above
This product has additional required/recommended options. To configure, add to your cart.
Interior Handle Required
Century Single Cylinder Exterior Entrance Handleset from the F-Series
Inspired by the clean lines of the modern movement, the Century is an excellent choice for the contemporary home.
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 1 Deadbolt with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style
- Utilizes the new B-Series deadbolt with increased security and easier installation!
- 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
- Integrated anti-pick shield with Snap & Stay(tm) self adjusting tension provides added security and simplifies installation
- 1" Edge bore door preparation required for larger bolt housing
- Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
- Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
- Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
- Works for both 2-3/8" and 2-3/4" backsets.
- ADA compliant thumb turn
- Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
- Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.
- Old F358 - New F58
- Old F359 - New F59
- Old F362 - New F62
- Old F392 - New F92
- Old F394 - New F94
Additional Schlage Links
Our SKU: F58-CEN
This product is listed under the following manufacturer number(s):
Lifetime Polished Brass
*Denotes a finish or option that has been discontinued
13 Questions from the Community
Do you have a dummy to the F58-CEN and what's on other side?
A. The Schlage F92-CEN is the dummy equivalent for the F58-CEN. The interior pack is sold separately as their are a number of styles to choose from. When you add this F58-CEN to the cart, you will be prompted to select an interior pack. What is presented to you at the next page includes all the compatible options.
Can we get an elan door handle for the inside?
A. Yes the Schlage Elan interior pack is a Schlage F59-ELA. Once you select your finish and free keying option, click the add to cart button. You will then be prompted with all the compatible interior packs. Not all interior packs are compatible with all hanldesets across all brands, so selecting from the options presenting is important.
What is the model / part number for the spring latch for this handle set?
What is the measurement of the length of the outside handle center holes?
single cylinder versus double cylinder
A. A single cylinder handleset is thrown or retracted by a key from the outside or by a turn unit on the inside. A double cylinder handleset is operated from both the inside and outside using a key. The Double Cylinder model numbers begin with: F62-CEN but are sold differently than the single cylinder models and include the interior packs. Simply search our site for "F62-CEN" and you will see all the models.
Can I use a Shlage lattitude door handle for the inside? If so, which one?
i need a 5 inch backset... can you accommodate?
My door is 2 1/4" thick. will this product work for me?
Will the F58-CEN work with an existing 2 1/2" backset?
How long is the F58-CEN?
Can I get the dead bolt portion of the century model keyed on both sides?
is it possible both on this doorknob..and on the schlage oval keyed entry to get polished chrome on the interior and aged bronze...or black...on the outside?
What is the center to center of the handle?
Schlage F-Series Collection
Other Products In The Schlage F-Series Collection
Latitude Reversible Passage Door Leverset Featuring a New Contemporary Design
Latitude Single Dummy Door Lever Featuring a New Contemporary Design
Latitude Reversible Privacy Door Leverset Featuring a New Contemporary Design
Flair Single Dummy Right Handed Lever
Georgian Passage Door Knob Set
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
(PVD Bright Brass), 605
(Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique
Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
(Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.
(Bright Chrome), 626
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866