|BHMA Certification||Grade 1|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Center to Center||4, 5.5|
|Cylinder||5 Pin Schlage C|
|Door Thickness||1-3/4", 1-5/8", 1-7/8", 2"|
|Function||Single Cylinder, Single Cylinder Handleset|
|Grip Center to Center||8.5|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Lock Style||Single Point|
Configure your Schlage F58ADD621 Addison Single Cylinder Exterior Entrance Handleset from the F-Series
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Please finish configuring product before adding to cart
Addison Single Cylinder Exterior Entrance Handleset from the F-Series
A traditional style redefined, inspired by the clean lines and quiet elegance of classic New England architecture. It brings a timeless glamour and perfect simplicity to any home’s entrance.
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 1 with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style
- Utilizes the new B-Series deadbolt with increased security and easier installation!
- 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
- Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
- 1" Edge bore door preparation required for larger bolt housing
- Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
- Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
- Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
- Works for both 2-3/8" and 2-3/4" backsets.
- ADA compliant thumb turn
- Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
- Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.
- Old F358 - New F58
- Old F359 - New F59
- Old F362 - New F62
- Old F392 - New F92
- Old F394 - New F94
Additional Schlage Links
Our SKU: F58-ADD
This product is listed under the following manufacturer number(s):
- Aged Bronze
- Antique Brass
- Antique Pewter
- Distressed Nickel
- Lifetime Polished Brass
- Matte Black
- Polished Brass
- Polished Chrome
- Satin Nickel
*Denotes a finish or option that has been discontinued
7 Questions from the Community
A dummy handleset is a doorknob that has the appearance of a regular door handleset, but it does not function. People use dummy handlesets to give an aesthetically pleasing look to a non-functional door.
What is a dummy handset?
A. A dummy handleset is a doorknob that has the appearance of a regular door handleset, but it does not function. People use dummy handlesets to give an aesthetically pleasing look to a non-functional door.
The Schlage F58-ADD extends out 3-3/16" from the door.
What is the depth (front to back) of the handle.
A. The Schlage F58-ADD extends out 3-3/16" from the door.
The Schlage F58-ADD smartkey counterpart is the Schlage F58-ADD-SK.
Is this available with the secure key option?
A. The Schlage F58-ADD smartkey counterpart is the Schlage F58-ADD-SK.
Yes, they are compatible.
Will the F59 Merano LH interior pack work with the F58 Addison exterior handleset?
A. Yes, they are compatible.
The Schlage F58-ADD dummy piece is the F92-ADD
Is there a dummy left handed equivalent for this model?
A. The Schlage F58-ADD dummy piece is the F92-ADD
The Schlage F58-ADD does not include the interior pack. It uses the F59 series interior packs, which have multiple style options. Once you add the F58-ADD to the cart it will give you all your interior pack options.
Does this come with an interior handle? If so what doesvit look like? Thanks.
A. The Schlage F58-ADD does not include the interior pack. It uses the F59 series interior packs, which have multiple style options. Once you add the F58-ADD to the cart it will give you all your interior pack options.
The F58-ADD will work with the F59-and knob.
F58-ADD work with the Schlage F10AND716ADD Addison Collection Andover Passage Knob
The F58-ADD will work with the F59-and knob.
Schlage Addison Collection
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
(PVD Bright Brass), 605
(Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique
Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
(Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.
(Bright Chrome), 626
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866