|BHMA Certification||Grade 2|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Door Thickness||1-1/2", 1-3/4", 1-3/8", 1-5/8"|
|Function||Bath/Bedroom Privacy Lock, Privacy|
|Handing||Left, Reversible, Right|
|Latch Faceplate||Drive-In, Round Corner|
Schlage Works for You
Installation is easy, all you need is a screwdriver and a little time. This set is designed to fit standard prep doors so if your door is already setup the install can happen very quickly.
BHMA/ANSI Grade 2 certified which indicates excellent performance across a range of residential applications. This product is built from high-quality materials to give you exceptional security.
A Lifetime Mechanical and Finish Warranty gives you the piece of mind that this product will be looking good and functioning smoothly for as long as you own it.(Finish warranty does not include Oil Rubbed Bronze because it is a living finish and it is expected to patina over time)
These levers are field reversible allowing this leverset to be used for both right and left handed applications with ease and eliminating any chance of getting a wrong handed product.
Privacy Function: Schlage's privacy door lever sets are locked from the interior using a pin located on the interior rosette with an emergency release on the exterior rosette. Privacy levers are ideal for bathrooms, bedrooms, or anywhere a locking door is desired but a keyed cylinder isn't necessary.
- Adjusts to fit all standard door preparations
- Easy installation makes for a one-person project
- Interior screws are exposed
- ANSI/BHMA A156.2, 2011, Grade 2
- Reversible lever allows for use as both right-hand and left-hand levers
- Faceplates (Part 16-080): Supplied with 1/4" Round Corner and Drive-In Faceplates
- Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4" x 1-5/8"
- Lifetime Mechanical and Finish Warranty (Finish warranty does not include Oil Rubbed Bronze because it is a living finish and will patina over time)
- ADA Compliant
- Backset: Adjustable to 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 7/8"
- Door Thickness: 1-3/8" or 1-3/4"
- Handing: Left, Right, Reversible
- Lever Length: 4-1/8"
- Projection: 2-1/4"
- Product Weight: 1.55 lbs
- F10-ACC: Passage Leverset
- F40-ACC (This Model): Privacy Leverset
- F51-ACC: Keyed Entry Leverset
- F170-ACC-LH: Left Handed Single Dummy Lever
- F170-ACC-RH: Right Handed Single Dummy Lever
For over 90 years, Schlage has been making homes more stylish and secure with the best door locks and door hardware. Today the Schlage family of products also includes the very best in electronic locks, keyless door locks, and home security. Let Schlage's hardware and security solutions protect and enhance the things that matter most to you.
Additional Schlage Links
Our SKU: F40-ACC
This product is listed under the following manufacturer number(s):
- Aged Bronze
- Antique Brass
- Antique Pewter
- Distressed Nickel
- Matte Black
- Oil Rubbed Bronze
- Polished Brass
- Polished Brass x Polished Chrome
- Polished Brass x Satin Nickel
- Polished Chrome
- Polished Nickel
- Satin Brass
- Satin Chrome
- Satin Nickel
*Denotes a finish or option that has been discontinued
11 Questions from the Community
The Schlage F40-ACC does not come with a square corner faceplate, but that type of faceplate can be ordered separately from our website.
Can this lever come with a square corner faceplate 1x2 1/4?
A. The Schlage F40-ACC does not come with a square corner faceplate, but that type of faceplate can be ordered separately from our website.
The Schlage F40-ACC can be unlocked from the outside with an emergency key that is supplied with the item. The emergency key is placed in a hole located in the center of the exterior lever. Sometimes, using something like a bobby pin or small object will work as a unlock tool as well.
How do you unlock the door from the outside if you accidentally lock and close the door?
A. The Schlage F40-ACC can be unlocked from the outside with an emergency key that is supplied with the item. The emergency key is placed in a hole located in the center of the exterior lever. Sometimes, using something like a bobby pin or small object will work as a unlock tool as well.
The Schlage F40-ACC requires about a 90 degree turn to fully open.
How much do you have to turn the handle to open/unlatch the door?
A. The Schlage F40-ACC requires about a 90 degree turn to fully open.
The Schlage F40-ACC is a complete set with the lock, both handles, strike plate and faceplate.
Is this the complete set with both handles, locking mech. and striker plate?
A. The Schlage F40-ACC is a complete set with the lock, both handles, strike plate and faceplate.
The Schlage Accent lever is 4-1/8" long, and the rosette is 2-3/4" in diameter.
what is the length of the handle? what is a rosette? Looking at handle lengths differences between F10-fla and F40-ACC.
A. The Schlage Accent lever is 4-1/8" long, and the rosette is 2-3/4" in diameter.
The Schlage F40-ACC is reversible.
Is there a right and left for the privacy locks?
A. The Schlage F40-ACC is reversible.
The Schlage F40-ACC is only available in the standard polished brass.
Is this lock available in lifetime polished brass finish?
A. The Schlage F40-ACC is only available in the standard polished brass.
This would be a special order item. Please contact customer service for further assistance at (888)649-0865.
I need a satin nickel/polished chrome lever handle with the locking button on the chrome side. right-handed door. can this be ordered specifically? It does not seem that 'reversible' is accurate.
A. This would be a special order item. Please contact customer service for further assistance at (888)649-0865.
The emergency key allows you to unlock the F40-ACC if you accidentally lock yourself out of the room.
What does the emergency key do?
A. The emergency key allows you to unlock the F40-ACC if you accidentally lock yourself out of the room.
The Schlage F40-ACC has a push-button locking mechanism on the interior.
Does this lever set lock and unlock via a push button in the center, or a button that you have to turn and push?
The Schlage F40-ACC has a push-button locking mechanism on the interior.
The Schlage F40-ACC can have a split finish on it.
Can I order a handle set with two dfferent finishes?
The Schlage F40-ACC can have a split finish on it.
Schlage Accent Collection
Other Products In The Schlage Accent Collection
Leland Single Metal Lever Handle$23.96-$38.32(13)
Pullout Spray High-Arc Kitchen Faucet with Diamond...$434.88-$587.52(8)
Two Metal Lever Handle from the Victorian Collection$65.56-$117.88(3)
Single Handle Metal Lever$13.73-$25.76(13)
Single Lever Metal Handle Kit$33.25-$59.78(4)
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
(PVD Bright Brass), 605
(Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique
Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
(Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.
(Bright Chrome), 626
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866