|BHMA Certification||Grade 2|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Door Thickness||1-1/2", 1-3/4", 1-3/8", 1-5/8"|
|Handing||Left, Reversible, Right|
|Latch Faceplate||Drive-In, Round Corner|
The simple elegance of the Accent Series will enhance any room's warmth and beauty. Schlage Accents levers provide an upgrade in appearance and are sure to enhance any door in your home. Accents' striking designs and elegant trim provide the finishing touches to complement your projects.
- Interior Screws are Exposed
- Adjusts to fit all standard door preparations
- Easy installation makes for a one-person project
- Materials and construction are high quality for exceptional security
- Lifetime finish and mechanical guarantee
- Quality finishes coordinate with plumbing and lighting
- Reversible lever allows for use as both right-hand and left-hand levers
- Faceplates (Part 16-080): Supplied with 1/4" Round Corner and Drive-In Faceplates
- Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4" x 1-5/8"
- Backset: 2-3/4" or 2-3/8", Adjustable
- Handing: Reversible
- Cross Bore: 2-1/8"
- Edge Bore: 1"
Additional Schlage Links
Our SKU: F10-ACC
This product is listed under the following manufacturer number(s):
- Aged Bronze
- Antique Brass
- Antique Pewter
- Distressed Nickel
- Lifetime Polished Brass
- Matte Black
- Oil Rubbed Bronze
- Polished Brass
- Polished Chrome
- Satin Chrome
- Satin Nickel
*Denotes a finish or option that has been discontinued
8 Questions from the Community
The f10-acc is a passage function, so the levers will turn and operate a latch. You will probably need the dummy function which is item # F170-acc which is screwed to the doors and acts as a pull only product.
I have a set of doors that open from a hall into my kitchen. These doors have only knobs screwed into the doors on one side which you pull to open. I want to change these out to the Schlage F10-ACC lever type but am not sure if this will work for this situation.
A. The f10-acc is a passage function, so the levers will turn and operate a latch. You will probably need the dummy function which is item # F170-acc which is screwed to the doors and acts as a pull only product.
The Schlage F10-ACC will not fit a 1-1/4" door. It will fit 1-3/8" to 1-3/4".
Will the Schlage F10 fit into a 1 1/4 inch door?
A. The Schlage F10-ACC will not fit a 1-1/4" door. It will fit 1-3/8" to 1-3/4".
The Schlage 620 finish is called Antique Nickel/Pewter.
I AM LOOKING FOR THE 620 FINISH - WHAT IS THAT CALLED
A. The Schlage 620 finish is called Antique Nickel/Pewter.
Schlage does not make this with a square corner faceplate.
Is the latch faceplate made with a squar corner
A. Schlage does not make this with a square corner faceplate.
The Schlage F10-ACC is a passage door and is normally used indoors for passage between one room to another. I recommend the Schlage F51-ACC, and the matching deadbolt B60.
Is this suitable for an entry door from a screened porch and is there a matching deadbolt lock?
A. The Schlage F10-ACC is a passage door and is normally used indoors for passage between one room to another. I recommend the Schlage F51-ACC, and the matching deadbolt B60.
The best way to determine handing is to answer the following question: If you're on the outside of the door, facing it, on which side are the hinges? If the hinges are on the left, you'll need a left handed lever set. If on the right, you'll need a right handed.
How do you determine whether you need a LH or RH lever set? Some of my bedroom doors are rabetted, open into the room with the hinges on the left side when you are standing in the hallway.
A. The best way to determine handing is to answer the following question: If you're on the outside of the door, facing it, on which side are the hinges? If the hinges are on the left, you'll need a left handed lever set. If on the right, you'll need a right handed.
The best option for matchting 3 1/2" x 3 1/2" hinges in oil rubbed bronze will be the Weslock 70100.
Which 3 1/2 x 3 1/2 hinges would match this oil rubbed bronze finish?
A. The best option for matchting 3 1/2" x 3 1/2" hinges in oil rubbed bronze will be the Weslock 70100.
The privacy version of this is the F40-ACC.
Is there an option to have the privacy lock on this lever?
The privacy version of this is the F40-ACC.
Schlage Accent Collection
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user ("Original User') of our Schlage brand product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage's sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage's examination, do not disclose to Schlage's satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage's maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product's performance, the Original User may simply contact Schlage Customer Service at 800-847-1864 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
(PVD Bright Brass), 605
(Bright Brass), 609 (Antique Brass), 619 (Satin Nickel), 620 (Antique
Pewter), 621 (Distressed Nickel), 622 (Matte Black), 716 (Aged Bronze)
Care Guidelines: Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
(Oil Rubbed Bronze)
Care Guidelines: Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax.
(Bright Chrome), 626
Care Guidelines: Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
Schlage Customer Service
2119 East Kansas City Road, Olathe, KS 66061 1-800-366-5625 (fax) 1-800-847-1864 (phone)
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industial No.11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866