Saniflo 002 White Saniplus Macerating Pump

Item #: BCI1809829

Offer Ends

Originally $858.00, You Save 15%
Shipping: Free Shipping! See Details
Ships In:
Ships in 2 to 3 business days
19 In Stock


Please finish configuring product before adding to cart

Technical Specs

Height 13.5
Length 9
Width 22

Saniplus Macerating Pump

The SANIPLUS is a system used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It can handle the effluent from a toilet, sink, bathtub and shower. It offers a high level of styling that makes it the ideal centerpiece for a modern bathroom. The inside of the SANIPLUS is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. The unit pumps the effluent upward 15 feet and/or 150 horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again. A normal operating cycle for SANIPLUS takes about 7-9 seconds. In addition to the toilet waste, the SANIPLUS with also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bathtub, a shower and a urinal. When adding a bathtub or shower, a base will have to be constructed. This base should be made out of a 2” X 6” (minimum) or 2” X 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4” per foot gravity flow towards the pump unit. The wastewater from other sanitary fixtures is discharged into the SANIPLUS via two 2-inch inlets on either side of the housing. Either one or both inlets can be used as required. The discharge elbow on top of the SANIPLUS can be turned either to the left, to the right, or towards the back, depending on the discharge installation. A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves, or similar devices is not permitted as these are considered one-way air vent systems.

  • Build a complete bathroom for residential applications
  • Vertical pumping up to 15 feet and 150 feet horizontally
  • Quiet range
  • Must be connected to Saniflo's discharge toilet
  • Offers a high level of styling
  • 2 Year Warranty

Additional Saniflo Links

Our SKU: 2

This product is listed under the following manufacturer number(s):

  • White

*Denotes a finish or option that has been discontinued

1 Question from the Community

  • The Saniflo 2 measures 13.5"h x 9"l x 22"w.

    hi, what are the dimensions of this?

    A. The Saniflo 2 measures 13.5"h x 9"l x 22"w.

Warranty Info

Recently viewed items