Saniflo 14 White Sanigrind Grinder Pump For Bottom Outlet Toilets

Item #: BCI1809831


Offer Ends

$863.20
Originally $1,019.00, You Save 15%
Shipping: Free Shipping! See Details
Ships In:
Ships in 1 week, by January 2nd
Finish:
White
Stock:
7 In Stock
Quantity:
 

Discontinued

Please finish configuring product before adding to cart

Technical Specs

Height 19
Length 10.75
Width 20

Sanigrind Grinder Pump For Bottom Outlet Toilets

The SANIGRIND is a system that allows up to 3 connections to install a complete bathroom up to 18 feet below the sewer line, or even up to 150 feet away from a soil stack. This is a grinder unit only and is designed to work with a standard bottom outlet toilet. It can handle effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection). It can be installed in many locations such as, a loft/attic, upper floor, ground floor, basement and even a garage. It is also designed to handle accidental flushing of sanitary articles; such as sanitary napkins, q-tips, dental floss, etc. In commercial installations, plumbing codes require an elongated bowl to be installed with this system. The unit pumps the effluent upward 18 feet and/or 150 feet horizontally (with gravity fall). The operating cycle for the SANIGRIND varies depending upon the discharge pipe run configuration. In addition, the SANIGRIND will also discharge gray water from a variety of other sanitary fixtures, such as: a sink, a bathtub/shower, a urinal and even a washing machine. When adding a bathtub/shower, there should be a height difference between the side inlet of the pump and the base of the bathtub/shower. This height difference should be of 6” or 8” (recommended), allowing for the installation of a P-trap and the required ¼” per foot gravity flow toward the pump unit. The wastewater form other sanitary fixtures is discharged into the SANIGRIND via two 1 ½ inch inlets on either side of the housing. The discharge elbow on top of the SANIGRIND can be rotated 360 degrees depending on the discharge installation. A non-return valve (included in assembly) prevents backflow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. The vent system should be a two-way air vent. The use of mechanical vents, air admittance valves, or similar devices are not permitted as these are considered one-way air vent systems.

  • Build a complete bathroom and more for residential and commercial applications
  • Vertical pumping up to 18 feet and 150 feet horizontally
  • Great for retrofitting applications
  • Designed to work with standard bottom outlet toilets not supplied by Saniflo
  • Designed for heavy use
  • 2 Year Warranty

Additional Saniflo Links

Our SKU: 14

This product is listed under the following manufacturer number(s):

  • White
    14

*Denotes a finish or option that has been discontinued

0 Question from the Community

Warranty Info

Recently viewed items
  • Saniflo 14
    Saniflo 14

    Sanigrind Grinder Pump For Bottom Outlet...