Like many retailers, Faucet.com can choose to set its own prices independently. And even though manufacturers require Faucet.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Faucet.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Faucet.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Faucet.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
|Inspection and Location Guide|
|Ball Guide||2 Included|
|Country Of Origin||USA|
|Display Resolution||510 x 496 NTSC|
|Made in America||Yes|
|Pipe Capacity||1-1/2" - 4"|
This product has additional required/recommended options. To configure, add to your cart.
Laptop Interface Recommended
100' SeeSnake microReel Inspection Camera System with Sonde and Counter, for use with Ridgid SeeSnake (Not Included). For 1-1/2" to 4" Lines.
The SeeSnake® microReel Camera System allows you to perform inspections quicker and easier than ever. The complete system takes up less than half the space of our popular SeeSnake Compact System while still allowing you to inspect lines up to 100 feet. The interchangeable drum cartridge system allows you to use the same reel to inspect difficult-to-navigate lines from 1 to 3 inches up to 30 feet (optional D30 “SeeSnake® microDrain™ Reel” Drum).
- Lightweight and Compact unit allows you to easily stow and carry the camera in your truck and onto the job site providing an inspection solution whenever and wherever you need it.
- Multiple Monitor Compatibility allows you to use your microReel with your SeeSnake monitor or the microEXPLORER™ Digital Inspection Camera.
- Durable and Reliable construction quality that you have come to expect from the RIDGID® SeeSnake name.
- Interchangeable Drums let you change out the inner drum depending on the application. Choose from:
- L100 – 1 1/2 to 4 inch lines with a stiffer push cable allowing you to inspect lines up to 100 feet.
- D30 – Small diameter with tight turns, 1 1/2" to 3" P-Traps, toilet traps for lines up to 30 feet.
- Camera Head: 0.98" (25 mm)
- Cable Length: 100' (30 m)
- Cable Diameter: 0.27" (6.7 mm)
- Line Capacity: 1.5" to 4" (38 - 100 mm)
- Weight: 10.3 lbs. (4.7 kg)
- Length: 13.25" (33.7 cm)
- Width: 6.6" (16.8 cm)
- Height: 17.5" (44.5 cm)
- Resolution: 510 x 496 NTSC
- Ball guide: 2 included
- Sonde: 512Hz
- Counter: Optional
Additional Ridgid Links
Our SKU: 35183
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
No Questions Found
Ridgid microReel Collection
Other Products In The Ridgid microReel Collection
100ft. SeeSnake microReel Inspection Camera System...$3,272.37-$3,272.37
100ft. SeeSnake microReel Inspection Camera System...$2,757.58-$2,757.58
100ft. SeeSnake microReel Inspection Camera System...$2,671.47-$2,671.47
RIDGID branded tools are known the world over as best-in-class tools that allow the end-user to complete jobs more quickly and reliably. However, there is added peace of mind with the RIDGID Full Lifetime Warranty. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge.
What is Covered
RIDGID tools are warranted to be free of material and workmanship defects.
How Long Coverage Lasts
This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage ends when the product becomes unusable for reasons other than defects in workmanship or material.
How to Obtain Service
To obtain the benefit of this warranty, deliver the complete product via prepaid transportation to Ridge Tool Company, Elyria, Ohio, or any authorized RIDGID Independent Service Center. Pipe wrenches and other hand tools should be returned to the place of purchase.
What We Will Do to Correct Problems
Warranted products will be repaired or replaced, at Ridge Tool's option, and returned at no charge; or, if after three attempts to repair or replace during the warranty period the product is still defective, you can elect to receive a full refund of your purchase price.
What is Not Covered
Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. Ridge Tool shall not be responsible for any incidental or consequential damages.
How Local Laws Relate to the Warranty
Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specifi c rights, and you may also have other rights, which vary, from state to state, province to province, or country to country.
No Other Express Warranty Applies
This Full Lifetime Warranty is the sole and exclusive warranty for RIDGID products. No employee, agent, dealer, or other person is authorized to alter this warranty or make any other warranty on behalf of the Ridge Tool Company. Ridge Tool Company offers a comprehensive lifetime warranty to support products purchased under the RIDGID Brand, excluding licensed goods. RIDGID branded products are built with reliability, dependability and durability and are covered by a Full Lifetime Warranty against defects in materials or workmanship. In the event that you have a problem with your RIDGID product due to a defect in materials or poor workmanship, we will attempt to remedy the problem in accordance with our printed warranty policy in a timely manner. For warranty information on RIDGID licensed goods, visit www.ridgid.com
NORMAL WEAR AND TEAR:
Commonly, our tools are used on job sites in the most demanding applications and environments. Under these conditions and over time, the RIDGID product may experience normal wear and tear and require service. While normal wear & tear is not considered a "defect" and is not covered by the RIDGID Lifetime Warranty, it is our goal to get your tool back in service a soon as possible. To help expedite this service, Ridge Tool offers a complete assortment of service parts and a network of RIDGID Independent Service Centers to meet your service needs. Our Service Center Network has been Factory Trained to provide quality repair service as well as accurate determination & execution of RIDGID warranty if required. For a complete list of RIDGID Independent Service Centers visit www.ridgid.com.
DEFECTS IN MATERIALS OR WORKMANSHIP:
It is our experience that a product that fails prematurely due to a manufacturing defect in materials or workmanship, will generally do so very early in the products life cycle, often the first or second time the product is used. When returned for inspection, these products are generally found to still be in like new condition and show very little signs of use. It is uncommon for a product that was manufactured with a defect, to survive under normal use for any extended period of time. Products that are returned for warranty inspection after months or years of continuous reliable service are rarely found to be defective. The most common demand for service is the result of normal wear and tear issues, which are not considered to be a defect in materials or workmanship.