This product has additional required/recommended options. To configure, add to your cart.
Non-IC Bath Heater Light. UL Listed for damp locations, not for use over direct moisture area such as a shower.
- Solid steel construction housing
- Trim made of aluminum with satin finish
- Housing is removable, junction box snaps out
- 1/2" and-3/4" knock outs allow for rigid and BX fittings
- Adaptable for remodel use (requires P8607-01 plaster clips)
- Non-IC rated, UL listed for damp locations and through-branch wiring
- 250W R40 Heater bulb (Sold Separately)
- Therma-Gard automatic resetting thermal protection
- Ceiling opening: 6 7/8"
- Width: 8-3/8"
- Length: 13"
- Height: 7-3/4"
- Maximum ceiling thickness: 1-1/2"
Additional Progress Lighting Links
- View Manufacturer Warranty
- Shop All Progress Lighting Products
- Shop All Progress Lighting Complete Heater Housing & Trim Collection Products
Our SKU: P6952TG
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
11 Questions from the Community
Can this unit be installed in a shower stall?
A. The Progress Lighting P6952TG heat lamp can be used in a bathroom but because it is only rated for damp locations and not wet locations, it is not supposed to be installed in areas with direct water contact, such as over a shower.
can this product be used to take the chill out a bathroom. And can it be installed in an already finished ceiling.
A. The Progress Lighting P6952TG is a great choice for use of a Heat Lamp in your Bathroom. It is UL rated for Damp locations and the 250w bulb will do well to take off the chill. Also, this light is designed in such a way that it does make for an easy and clean installation even in a finished ceiling.
Can a regular bulb be put in this unit?
A. The Progress Lighting P6952TG Shower Lighting Heat Lamp does have a medium based socket so a standard incandescent bulb can be installed but it is not recommended for use with this unit. Also, part of the heating component of the unit is the 250W R40 Heater bulb that it is meant to be used with, using a different bulb would lose most of the heating function.
What are the installation requirements for the P6952TG in an insulated ceiling?
How many volts does this light use?
What is the maximum wattage this can take?
Is there more detail on installation?
If this heat/light cannot be installed over shower, where can it be installed in the bathroom?
A. The issue here is the UL rating. This fixture is rated for a "damp" location, which would be the bathroom in general. Over the shower would be considered a "wet" location due to the constant moisture and humidity. Most customers install this just outside their shower enclosure so it heats upon entry and exit.
Can you order this with white trim? Can this be installed in new construction?
does anyone make a wet location heat lamp
Can you use a dimmer switch on the heat lamp to control the heat?
1 Year Product Warranty
When properly installed and under normal conditions of use, Progress Lighting, Inc. (“Seller”) warrants its manufactured products, including their metal finishes (“Product(s)”) will conform to its catalogue specifications and be free from defects in materials or workmanship for a period of one (1) year from the date of sale to end user, as specified in Seller’s shipment documents for each Product (extended warranties may apply to Seller’s fan motors and Energy Star® Products as indicated in Seller’s Product manuals). Warping of wooden or plastic blades is not covered by this warranty. This warranty excludes fluorescent ballasts and high intensity discharge (HID) components, and Buyer agrees to make all claims regarding defects or deficiencies therefore according to the warranty of the manufacturer thereof as its sole source of recourse or compensation. Seller’s obligations under this warranty and Buyer’s sole remedy for its breach to the fullest extent permitted by law, shall be limited to the value of the cost of repair or replacement of the Product, pursuant to a written warranty claim validated in writing by Seller. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY LOSSES OR ACTUAL DAMAGES TO ANY CLAIMANT, INCLUDING BUT NOT LIMITED TO SPECIAL, INCIDENTAL, CONSEQUENTIAL, MULTIPLE, OR OTHER SUCH INDIRECT DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF REVENUES OR PROFITS), WHETHER ARISING OUT OF OR AS A RESULT OF BREACH OF CONTRACT, WARRANTY (EXCEPT THOSE SET FORTH HERIN), TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INTELLECTUAL PROPERTY INFRINGEMENT OR OTHERWISE. In no case does this warranty extend to anybody other than Seller’s customers, and no one is authorized to extend warranties or remedies on Seller’s behalf. To be valid, the warranty claim must be made: (a) in writing according to Seller’s procedures existing at the time of the claim, (b) within thirty (30) days of discovery of the defect, (c) within the applicable warranty period, and (d) include the dated store receipt or invoice evidencing purchase of the Product. Warranty claims should be sent to: Progress Lighting, Inc., P.O. Box 6701, Greenville, SC 29606. Products may be returned only after a Return Authorization Number has been issued by Seller’s customer service department. Any unauthorized return, repair, replacement, modification or misuse of the Products by Buyer shall void the warranty. THIS WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY FOR SUCH PRODUCTS, AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES. SELLER SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.