Progress Lighting P6952TG 120V 45W Recessed Heating Lighting Fixture for R-40 Lamps
BCI358568
Compare Our Prices
Technical Specs
| Installation Sheet | |
| Specification Sheet | |
| Bulb Base | Medium (E26) |
| Bulb Type | Incandescent or Fluorescent |
| Complete Unit | Yes |
| Diameter | 7.75 |
| Finish Application | Satin |
| Height | 7.75 |
| Housing Included | Yes |
| IC Rating | Non-IC |
| Installation Type | Flush Mount |
| Light Direction | Down Lighting |
| Suggested Room Fit | Bathroom |
| Theme | Functional |
| Watts Per Bulb | 250 |
| Width | 8.375 |
Non-IC Bath Heater Light. UL Listed for damp locations, not for use over direct moisture area such as a shower.
Features:
- Solid steel construction housing
- Trim made of aluminum with satin finish
- Housing is removable, junction box snaps out
- 1/2" and-3/4" knock outs allow for rigid and BX fittings
- Adaptable for remodel use (requires P8607-01 plaster clips)
- Non-IC rated, UL listed for damp locations and through-branch wiring
- 250W R40 Heater bulb (Sold Separately)
- Therma-Gard automatic resetting thermal protection
Specifications:
- Ceiling opening: 6 7/8"
- Width: 8-3/8"
- Length: 13"
- Height: 7-3/4"
- Maximum ceiling thickness: 1-1/2"
Additional Progress Lighting Links
- View Manufacturer Warranty
- Shop All Progress Lighting Products
- Shop All Progress Lighting Recessed Lighting Collection Products
Our SKU: P6952TG
This product is listed under the following manufacturer number(s):
- P6952-16TG
Satin Aluminum
*Denotes a finish or option that has been discontinued
11 Questions from the Community
-
Can this unit be installed in a shower stall?
A. The Progress Lighting P6952TG heat lamp can be used in a bathroom but because it is only rated for damp locations and not wet locations, it is not supposed to be installed in areas with direct water contact, such as over a shower.
-
can this product be used to take the chill out a bathroom. And can it be installed in an already finished ceiling.
A. The Progress Lighting P6952TG is a great choice for use of a Heat Lamp in your Bathroom. It is UL rated for Damp locations and the 250w bulb will do well to take off the chill. Also, this light is designed in such a way that it does make for an easy and clean installation even in a finished ceiling.
-
Can a regular bulb be put in this unit?
A. The Progress Lighting P6952TG Shower Lighting Heat Lamp does have a medium based socket so a standard incandescent bulb can be installed but it is not recommended for use with this unit. Also, part of the heating component of the unit is the 250W R40 Heater bulb that it is meant to be used with, using a different bulb would lose most of the heating function.
-
What are the installation requirements for the P6952TG in an insulated ceiling?
-
How many volts does this light use?
-
What is the maximum wattage this can take?
-
Is there more detail on installation?
-
If this heat/light cannot be installed over shower, where can it be installed in the bathroom?
A. The issue here is the UL rating. This fixture is rated for a "damp" location, which would be the bathroom in general. Over the shower would be considered a "wet" location due to the constant moisture and humidity. Most customers install this just outside their shower enclosure so it heats upon entry and exit.
-
Can you order this with white trim? Can this be installed in new construction?
-
does anyone make a wet location heat lamp
-
Can you use a dimmer switch on the heat lamp to control the heat?
Product Reviews
Progress Lighting
Warranty Info
Progress Lighting
We make no warranties
The materials and information contained on, or obtained from this web site, are distributed and transmitted "as is" without warranties of any kind, either express or implied, including, without limitation, warranties of title or implied warranties of merchantability or fitness for a particular purpose. Further, Hubbell Incorporated and its affiliates do not warrant that the servers supporting the web site will be free of viruses, other harmful components, or defects of any nature. Information contained on this web site, including information obtained from external links thereon, is provided without any representation of any kind as to accuracy and should be verified by the user. Hubbell Incorporated and its affiliates are not responsible for any special, indirect, incidental or consequential damages that may arise from the use of, or the inability to use, the web site and/or the materials contained on the site whether the materials contained on the web site are provided by Hubbell Incorporated, an affiliate, or a third party.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR NON-INFRINGEMENT OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE AVAILABILITY, ACCURACY, RELIABILITY OR CONTENT OF THESE PAGES. HUBBELL INCORPORATED SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR FOR BUSINESS INTERRUPTION ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SERVICE, EVEN IF HUBBELL INCORPORATED HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSION OF CERTAIN WARRANTIES OR LIMITATIONS OF LIABILITY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THE LIABILITY OF HUBBELL INCORPORATED WOULD IN SUCH CASE BE LIMITED TO THE GREATEST EXTENT PERMITTED BY LAW.
