|Bulb Base||Candelabra (E12)|
|CUL Rating||Wet Location|
|Glass Features||Water Glass|
|Includes Glass Guard||No|
|Light Direction||Ambient Lighting|
|Location Rating||Wet Location|
|Number of Bulbs||3|
|Suggested Room Fit||Outdoor|
|UL Rating||Wet Location|
|Watts Per Bulb||60|
Classic rooflines and unique cast yoke straps in an oil rubbed bronze finish enhance a beautiful water glass urn shade. These features bring formal and traditional together in the Prestwick collection.
- Round stepped cast roof
- Cast yoke straps
- Die-cast aluminum construction
- Backplate covers a standard 4" octagonal recessed outlet box
- Fully covered under the Progress Lighting limited warranty
- Height: 16 3/4"
- Width: 10 3/4" (measured from furthest point left to furthest point right on fixture)
- Product Weight: 9 lbs
- Shade Height: 7 1/2"
- Wire Length: 6"
- HCO: 7 7/8" (height from center of outlet)
- Backplate: 9 " tall x 5" wide
- Bulb Type: Incandescent
- Bulb Base: Candelabra (E12)
- Bulb Included: No
- Number of Bulbs: 3
- Watts Per Bulb: 60
- Wattage: 180
- Voltage: 120v
- UL-CUL wet location listed
Additional Progress Lighting Links
- View Manufacturer Warranty
- Shop All Progress Lighting Products
- Shop All Progress Lighting Prestwick Collection Products
Our SKU: P5923
This product is listed under the following manufacturer number(s):
- Oil Rubbed Bronze
*Denotes a finish or option that has been discontinued
2 Questions from the Community
The wall plate dimensiond for the Progress Lighting P5923 is 5"W x 9"H.
What is the size of wall plate?
A. The wall plate dimensiond for the Progress Lighting P5923 is 5"W x 9"H.
The Progress Lighting P5923 is die cast aluminum.
What is the metal part made of?
A. The Progress Lighting P5923 is die cast aluminum.
Progress Lighting Prestwick Collection
Other Products In The Progress Lighting Prestwick Collection
1 Year Product Warranty
When properly installed and under normal conditions of use, Progress Lighting, Inc. (“Seller”) warrants its manufactured products, including their metal finishes (“Product(s)”) will conform to its catalogue specifications and be free from defects in materials or workmanship for a period of one (1) year from the date of sale to end user, as specified in Seller’s shipment documents for each Product (extended warranties may apply to Seller’s fan motors and Energy Star® Products as indicated in Seller’s Product manuals). Warping of wooden or plastic blades is not covered by this warranty. This warranty excludes fluorescent ballasts and high intensity discharge (HID) components, and Buyer agrees to make all claims regarding defects or deficiencies therefore according to the warranty of the manufacturer thereof as its sole source of recourse or compensation. Seller’s obligations under this warranty and Buyer’s sole remedy for its breach to the fullest extent permitted by law, shall be limited to the value of the cost of repair or replacement of the Product, pursuant to a written warranty claim validated in writing by Seller. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY LOSSES OR ACTUAL DAMAGES TO ANY CLAIMANT, INCLUDING BUT NOT LIMITED TO SPECIAL, INCIDENTAL, CONSEQUENTIAL, MULTIPLE, OR OTHER SUCH INDIRECT DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF REVENUES OR PROFITS), WHETHER ARISING OUT OF OR AS A RESULT OF BREACH OF CONTRACT, WARRANTY (EXCEPT THOSE SET FORTH HERIN), TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INTELLECTUAL PROPERTY INFRINGEMENT OR OTHERWISE. In no case does this warranty extend to anybody other than Seller’s customers, and no one is authorized to extend warranties or remedies on Seller’s behalf. To be valid, the warranty claim must be made: (a) in writing according to Seller’s procedures existing at the time of the claim, (b) within thirty (30) days of discovery of the defect, (c) within the applicable warranty period, and (d) include the dated store receipt or invoice evidencing purchase of the Product. Warranty claims should be sent to: Progress Lighting, Inc., P.O. Box 6701, Greenville, SC 29606. Products may be returned only after a Return Authorization Number has been issued by Seller’s customer service department. Any unauthorized return, repair, replacement, modification or misuse of the Products by Buyer shall void the warranty. THIS WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY FOR SUCH PRODUCTS, AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES. SELLER SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.