Lowest Prices on All Omnia
Use Coupon Code: OMNIA at checkout to receive additional savings!
Offer Ends 5/31/2013
Compare Our Prices
|Handing||Left, Reversible, Right|
Configure your Square Stainless Steel Single Cylinder Deadbolt
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Door Thickness more info ▼Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Finish configuring above to see price
Please finish configuring above
Square Stainless Steel Single Cylinder Deadbolt
Omnia's line of stainless steel lever latchsets is designed to accentuate any setting where a modern, sophisticated look is desired. Made from the highest grade material available, every piece is strong, durable, and resistant to corrosion and staining. Virtually effortless to clean, Omnia's stainless steel lever latchsets will maintain their smooth, rich luster for the lifetime of your home, while their interior components will prove worthy of the exceptional standards Omnia has set for more than 40 years.
- Fits standard 2-1/8" bore hole
- 1/2" projection
- Stainless Steel
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Stainless Steel and Max Steel Collection Products
Our SKU: D9000SA
This product is listed under the following manufacturer number(s):
- D9000SA US32D
Brushed Stainless Steel
*Denotes a finish or option that has been discontinued
3 Questions from the Community
is this dead bolt made of stainless steel or does it just have a stainless finish? also, is the back set changeable between 2.375 and 2.750 ?
is this deadbolt made from s.s. or does it just have a s.s, finish?
Is there a double cylinder version of this lock?
Omnia Stainless Steel and Max Steel Collection
Other Products In The Omnia Stainless Steel and Max Steel Collection
Single Cylinder Deadbolt Entry Set from the Stainless Steel Collection
Single Cylinder Auxiliary Deadbolt from the Stainless Steel Collection
Passage Mortise Lock from the Stainless Steel Collection
Keyed Entry Mortise Lock for Storerooms from the Stainless Steel Collection
Panic Proof Keyed Entry Mortise Lock from the Stainless Steel Collection
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.