Save on all Omnia Products!
Use Coupon Code: OMNIA at checkout to receive additional savings
Offer Ends 9/4/2015
|Approved for Commercial Use||Yes|
|Center to Center||5.5|
|Collection||Deadbolt with Plates|
Configure your Omnia D12415 US26 A Single Cylinder Deadbolt Entry Set with Plates from the Locksets Collection
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Handing more info ▼Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
Please finish configuring product before adding to cart
Single Cylinder Deadbolt Entry Set with Plates from the Locksets Collection
Omnia's locksets with solid brass trim are the locks of choice when optimum security and stunning design are the objective. An extensive range of knob and lever styles are available.
All lever entry sets provide a lever outside and a lever inside with matching backplate.
Latchbolt operates by knob or lever from either side except when outside trim is locked by stopbutton; then opens by key outside, by knob or lever inside. Deadbolt activated by key outside and by turnpiece inside.
- Available with 2-3/8" or 2-3/4" backset
- For 1-3/4" thick doors
- Fits narrow stiles of less than 4"
- Suitable for most pre-existing bores for cylindrical locks
- Full 1" throw deadbolt
- Tough, non-rusting materials used throughout
- Face covers, strikes, and critical interior parts are solid brass
- Latchbolt operates by knob or lever from either side. Deadbolt activated by key outside and turnpiece inside
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Deadbolt with Plates Collection Products
Our SKU: D12415A
This product is listed under the following manufacturer number(s):
- Polished Brass
D12415 US3 A
- Polished Chrome
D12415 US26 A
- Satin Chrome
D12415 US26D A
*Denotes a finish or option that has been discontinued
Omnia Deadbolt with Plates Collection
Other Products In The Omnia Deadbolt with Plates Collection
Design House 750869
Single Sided Deadbolt Reversible for Left or Right...$16.99-$16.99(1)
Single Cylinder Deadbolt Entry Set with Plates fro...$582.75-$600.75
Double Cylinder Deadbolt Entry Set with Plates fro...$555.00-$571.50
Single Cylinder Deadbolt Entry Set with Plates fro...$595.50-$614.25
Double Cylinder Deadbolt Entry Set with Plates fro...$595.50-$614.25
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.