Save on all Omnia Products!
Use Coupon Code: OMNIA at checkout to receive additional savings
Offer Ends 7/14/2015
|Configuration||Double Cylinder, Deadbolt, Door Hardware|
|Cylinder||5 Pin Schlage C|
|Cylinder Type||Double Cylinder|
|Door Thickness||1-3/4", 1-3/8"|
|Function||Keyed Entry, Double Cylinder|
|Handing||Left, Right, Reversible|
|Latch Faceplate||Square corner|
Configure your Omnia D0806TAC US3 Double Cylinder Traditional Auxiliary Deadbolt from the Stainless Steel Collection
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Door Thickness more info ▼Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Please finish configuring product before adding to cart
- Appropriate for most pre-existing bores for cylinder shaped locks
- Schlage "C" keyway supplied as standard
- Available in two backset options
- Uses a standard mortise cylinder for ease of re-keying
Keyed Entry (Double Cylinder) Function: Omnia double cylinder deadbolts are keyed on both sides of the door and can only be locked and unlocked via a key. Often used on doors where glass is near the door that could be easily broken and the thumbturn on a standard single cylinder lock would be accessible, double cylinder locks can also pose a safety hazard in times of emergency due to requiring a key to unlock. Please check local codes before installing.
- Backset: 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" or 1-3/4"
- Latch Faceplate: Square Corner
- Projection: 0.5"
- Material: Solid Forged Brass
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Stainless Steel and Max Steel Collection Products
Our SKU: D0806TAC
This product is listed under the following manufacturer number(s):
- Max Brass
- Max Steel
- Oil Rubbed Bronze
- Polished Brass
- Polished Chrome
- Polished Nickel
- Satin Chrome
- Satin Nickel
- Shaded Bronze
- Vintage Brass
- Vintage Copper
- Vintage Iron
*Denotes a finish or option that has been discontinued
1 Question from the Community
The Omnia D0806TAC is "Double Cylinder" which means you require a key to unlock it from either side of the door. There is no knob or turn dial, only a keyhole on each side.
Does the statement "Double Cylinder" mean the one can lock the door using a key from the outside and the inside?
A. The Omnia D0806TAC is "Double Cylinder" which means you require a key to unlock it from either side of the door. There is no knob or turn dial, only a keyhole on each side.
Omnia Stainless Steel and Max Steel Collection
Other Products In The Omnia Stainless Steel and Max Steel Collection
Floor Door Bumper$19.88-$28.42(7)
Floor Door Bumper from the Stainless Steel Collection$9.99-$15.90(6)
80 Gallon Natural Gas Stainless Steel Tank Commerc...$5,355.22-$5,355.22
Mortise Lock Single Dummy Set from the Stainless S...$333.75-$333.75
Mortise Lock Single Dummy Set from the Stainless S...$153.00-$153.00
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.