Configure your Omnia D0806A US26 Single Cylinder Modern Auxiliary Deadbolt from the Stainless Steel Collection
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Door Thickness more info ▼Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Please finish configuring product before adding to cart
Single Cylinder Modern Auxiliary Deadbolt
- Concealed screw rose
- Dimensions: 2-7/16" Diameter x 1/2" Projection
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Stainless Steel and Max Steel Collection Products
Our SKU: D0806A
This product is listed under the following manufacturer number(s):
- Max Brass
- Max Steel
- Oil Rubbed Bronze
- Polished Brass
- Polished Chrome
- Polished Nickel
- Satin Chrome
- Satin Nickel
- Shaded Bronze
*Denotes a finish or option that has been discontinued
2 Questions from the Community
The Omnia D0806A is a single cylinder deadbolt which means that one side is a thumb turn and the other has the key hole.
Do any of the Omnia deadbolts have a thumbturn available on the side opposite the keyed side of the deadbolt?
A. The Omnia D0806A is a single cylinder deadbolt which means that one side is a thumb turn and the other has the key hole.
The Omnia D0806A will have a thumb turn on the inside of the door and the keyed lock on the outside of the door. Any dead bolt that is called a single cylinder will have this feature.
do any of the omnia deadbolts have a thumbturn on the side opposite the keyed side of the lock?
A. The Omnia D0806A will have a thumb turn on the inside of the door and the keyed lock on the outside of the door. Any dead bolt that is called a single cylinder will have this feature.
Omnia Stainless Steel and Max Steel Collection
Other Products In The Omnia Stainless Steel and Max Steel Collection
Floor Door Bumper$19.88-$28.42(3)
Floor Door Bumper from the Stainless Steel Collection$9.99-$15.90(3)
Mortise Lock Single Dummy Set from the Stainless S...$333.75-$333.75
Mortise Lock Single Dummy Set from the Stainless S...$153.00-$153.00
Mortise Lock Single Dummy Set from the Stainless S...$157.50-$157.50
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.