Lowest Prices on All Omnia
Use Coupon Code: OMNIA at checkout to receive additional savings!
Offer Ends 5/31/2013
Compare Our Prices
|Approved for Commercial Use||Yes|
|Handing||Left, Reversible, Right|
|Latch Faceplate||Square Corner|
|Material||Brass, Stainless Steel|
|Theme||Traditional / Classic|
Configure your Latchset Collection Passage Door Leverset with 2.625 Inch Round Rosette
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Handing more info ▼Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
Rosette Style more info ▼A rosette is a decorative trim plate used to cover the bore hole and compliment the knob/lever. Choose the look you want by selecting the rosette of your choice!
Finish configuring above to see price
Please finish configuring above
Omnia 904PA Passage Door Lever Set With 2-9/16" Round Modern Rosettes from the Latchset Collection
For over four decades Omnia's latches have been opening and closing hundreds of thousands of doors all around the world. These latchsets are designed both for new installations and for replacement hardware on doors with standard bore up to 2-1/8". Omnia's latchsets in this collection are packaged complete with knobs or levers, specified roses, tubular latch, spring loaded sub-rose, spindle, and all mounting hardware. An installation template is included. Lever latchsets are supplied with extra heavy duty latches.
- Will fit 2-1/8" bore
- Available in 2-3/8" or 2-3/4" backset
- For 1-3/8" thick doors
- Features 28 Degree Latch Rotation
- All latch dimensions are standard to fit existing bores for replacement installations
- Tough, non-rusting materials used throughout latch
- Critical interior parts are made of solid brass
- All lever latchsets are ADA compliant
- Lever Projection: 2-3/4"
- Lever Length: 4-3/4"
- Rosette Diameter: 2-9/16"
Additional Omnia Links
Our SKU: 904PA
This product is listed under the following manufacturer number(s):
- 904 US5A PA
- 904 US3 PA
- 904 US10B PA
Oil Rubbed Bronze
- 904 US3 PA
- 904 US26 PA
- 904 US14 PA
- 904 US15 PA
- 904 US3A PA
*Denotes a finish or option that has been discontinued
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.