4" Contemporary Flush Pull from the Classics Collection
Details… those distinctive touches which clarify and reinforce fine architecture and design. Omnia's dedication to detail is revealed in our latest selection of solid brass trim hardware.
After hand polishing and high buffing, a hard and transparent lacquer is baked onto each piece. This special process retains the tradition of old world excellence while employing the best available modern technology.
The development and manufacture of these pieces focuses on our straightforward goals: aesthetics, function, and sensible pricing. We think we've succeeded with each and every piece. From a simple door pull to an ornate cremone bolt set, Omnia's trim hardware is truly the elegant alternative.
- 4" L x 1-3/4" W x 1/2" cup depth
Additional Omnia Links
Our SKU: 653
This product is listed under the following manufacturer number(s):
- Polished Brass
- Polished Chrome
- Satin Nickel
*Denotes a finish or option that has been discontinued
8 Questions from the Community
The Omnia 653 is not a locking unit and unfortunately there is not a matching locking unit.
Does this handle have a lock? If not, is there a matching lock that I can order?
A. The Omnia 653 is not a locking unit and unfortunately there is not a matching locking unit.
The Omnia 653 is going to have a finish screw on the inside of the handle.
Is this simply a friction fit or is there a tiny finish nail?
A. The Omnia 653 is going to have a finish screw on the inside of the handle.
The Omnia 653 can be used as s swing pull.
can I use this pull for a swing/hinge door?
A. The Omnia 653 can be used as s swing pull.
The Omnia 653 is just one piece, so you would need to order one for each side of the door.
I have a sliding pocket door. Do I need to order two handles separately or do they come in a package of 2?
A. The Omnia 653 is just one piece, so you would need to order one for each side of the door.
You will need a 4 of the Omnia 653 if you are using them on two doors. These will work for your door thickness.
How many of these do I need for a double pocket door so that we have two flush on each side? Also they are standard hollow pocket doors which are slightly more than an 1 and 1/4 thick. Will these work or do I need other ones? thanks.
A. You will need a 4 of the Omnia 653 if you are using them on two doors. These will work for your door thickness.
The Omnia 653 is a flush pull which means it mounts flat on the edge of the door. Thank you for your question!
What is the projection?
A. The Omnia 653 is a flush pull which means it mounts flat on the edge of the door. Thank you for your question!
The Omnia 653 is to be cut to 1 x 3/4 x 1/2 (height x width x depth). The manufacturer does not recommend cutting through the door for back to back application but if you need to do so for your set-up we recommend speaking with a contractor prior to cutting your door.
What are the cut out dimensions? Can I cut all the way through the door for a back to back mounting application?
A. The Omnia 653 is to be cut to 1 x 3/4 x 1/2 (height x width x depth). The manufacturer does not recommend cutting through the door for back to back application but if you need to do so for your set-up we recommend speaking with a contractor prior to cutting your door.
The Omnia 653 can work on a door that is 1-1/4 inches thick.
Can it be used if door is 1 3/4 inches thick?
The Omnia 653 can work on a door that is 1-1/4 inches thick.
Omnia Trim Collection
Other Products In The Omnia Trim Collection
Whitehaven 36" Single Basin Undermount Enameled Ca...$936.75-$1,400.48(19)
Artifacts Shower Trim Package with Single Function...$311.25-$423.38
Whitehaven 30" Single Basin Under-Mount Enameled C...$824.25-$1,232.29(18)
Linden Monitor 17 Series Dual Function Pressure Ba...$117.64-$175.65(30)
Vero Monitor 17 Series Dual Function Pressure Bala...$278.57-$417.83(10)
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.