|Approved for Commercial Use||Yes|
|Center to Center||3.625|
|Collection||Mortise with Plates|
|Function||Single Cylinder Entry Set|
|Grip Center to Center||7.25|
|Handing||Left, Left Hand Reverse, Right, Right Hand Reverse|
Configure your Omnia 11405 US3 J Keyed Entry Mortise Lock from the Locksets Collection
Backset more info ▼The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
Free Keying Option more info ▼
Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.
Please contact customer service for quotes on master keying or to key multiple manufacturers alike.
Two keys provided per key code.
Handing more info ▼Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
Please finish configuring product before adding to cart
Keyed Entry Mortise Lock from the Locksets Collection
Omnia's locksets with solid brass trim are the locks of choice when optimum security and stunning design are the objective. An extensive range of knob and lever styles are available.
Built to withstand heavy use, our commercial grade, UL listed, fire rated, mortise locks combine precision engineering for security and durability with attractive designs. All of our mortise locks are designed for use with heavy brass knobs or levers, with special springing provided on lever sets. A special rose assembly is bolted through the locks, and backplates feature a unique inside-to-outside mounting.
Latchbolt operates by knob or lever either side except when outside knob or lever is locked or unlocked by key in the cylinder. Auxiliary latchbolt deadlocks latchbolt.
- Available in 2-1/2" or 2-3/4" backset
- For doors 1-3/4" thick
- Heavy wrought steel case with zinc dichromate finish for corrosion resistance
- Adjustable armored steel front with 8" and 1-1/4" solid brass faceplate for all lock bodies
- 2-piece anti-friction design
Additional Omnia Links
- View Manufacturer Warranty
- Shop All Omnia Products
- Shop All Omnia Mortise with Plates Collection Products
Our SKU: 11405J
This product is listed under the following manufacturer number(s):
- Polished Brass
11405 US3 J
- Polished Chrome
11405 US26 J
- Shaded Bronze
11405 SB J
- Vintage Brass
11405 VB J
- Vintage Copper
11405 VC J
- Vintage Iron
11405 VI J
*Denotes a finish or option that has been discontinued
Omnia Mortise with Plates Collection
Other Products In The Omnia Mortise with Plates Collection
Passage Mortise Lock with Plates from the Locksets...$508.80-$524.40
Privacy Mortise Lock with Plates from the Locksets...$576.00-$593.40
Passage Mortise Lock with Plates from the Locksets...$539.40-$556.20
Privacy Mortise Lock with Plates from the Locksets...$604.20-$623.40
Passage Mortise Lock with Plates from the Locksets...$497.40-$513.00
We warrant our products against: defects in workmanship, materials, or operation subject to ordinary wear and tear as it pertains to particular installations for a period of (1) one year from the date of original purchase. Finishes are not warranted with the exception of products ordered with the Max Brass finish. However, we do not warrant against defects due to improper installation, forced entry, failure to exercise normal maintenance, or against the consequences of uses for which our products were not designed. For example, if our product or component part is used with a product that is not ours or a component part (such as our lock or latch with knobs, levers, escutcheons and roses) that is not ours, our warranty shall only apply if, and to the extent, that the purchaser can show that our products or component part itself was defective and the defect was not related to alteration or to adverse defects of such use with a product or component part not ours. Omnia is not responsible for any costs associated with installation, repair or replacement or for damage to any product which is not sold by Omnia. Our only liability, whether in tort or in contract, under this warranty or any express or implied warranty is to repair or replace products which are returned to us by written authorization, shipping charges prepaid, at the address below within one year after our delivery thereof to the original purchaser from us, and are determined by us to be defective. If damage has resulted from shipment, our customer's only remedy is to make a claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have give prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair, in which case we will pay what we consider to be the reasonable cost thereof. This warranty is expressly in lieu of all other express warranties. Implied warranties shall be limited to the duration of the warranty period of this express warranty. We shall under no circumstances be liable for incidental or consequential damages.