Compare Our Prices
|Approved for Commercial Use||Yes|
|Cartridge Technology||M-PACT Common Valve|
|Diverter Location||Tub Spout|
|Drain Assembly Included||No|
|Flow Rate (GPM)||2.5|
|Installation Type||Wall Mounted|
|Mounting Type||Wall Mounted|
|Number Of Bodysprays||0|
|Number Of Handles||1|
|Shower Arm Reach||6|
|Showerhead Flow Rate||2.5|
|Slide Bar Included||No|
|Valve Type||Pressure Balanced|
|Wall Supply Included||Yes|
This product has additional required/recommended options. To configure, add to your cart.
Rough In Valve Required
- Covered under Moen's limited lifetime faucet warranty
- Premier finishing process - finishes will resist corrosion and tarnishing through everyday use
- The Brantford Collection features a traditional style giving your home a timeless appeal
- Designed for reliability, safety and sophisticated style, Moen has set the standard for quality and innovation throughout the industry
- Single function shower head
- Single function cartridge - one handle controls both volume and temperature
- Featuring Moen's M-PACT Common Valve System
- Tub and Shower Package Includes: Valve trim, shower head, shower arm and tub spout
- Designed to easily install with standard U.S. plumbing connections
- ADA compliant
- All hardware required for installation is included
Product Technologies / Benefits:
- Posi-Temp® Valve: A pressure balancing valve that maintains water temperature within 3° F. Built-in temperature limit stops allow you to control how far the handle rotates, in effect controlling the range of water temperature. The Posi-Temp® offers the best water flow available for any comparable valve.
- M-PACT Common Valve System: This innovation from Moen gives the homeowner the up-most functionality and convenience when it comes to bathroom faucets. Designed to be a catch-all valve system, once M-PACT is installed you can upgrade the style of the lavatory or shower faucet without replacing any of the faucet plumbing.
Valve Inlet Connections:
Valve Trim Specifications:
- Temperature dial swings 120-degrees
- Escutcheon (Cover Plate) Diameter: 7"
- Includes pre-set safety stop with override capability
- Rough-in valve is sold separately (when adding to cart, valve will be offered)
Shower Head Specifications:
- Single function shower head with full body spray pattern
- Shower head rotates 360-degrees on a swivel ball assembly
- Flow Rate: 2.5 GPM (gallons-per-minute)
- Shower Head Width: 3-1/2"
- Shower Arm Length: 6"
Tub Spout Specifications:
- Spout Reach: 7"
- Integrated diverter for switching between tub and shower applications
- Unrestricted flow rate allows for rapid filling of the tub
- T2153: This model
- T2152: This model without tub spout
- T2152EP: This model without tub spout + eco-friendly shower head
- T2153EP: Eco-friendly version of this model
- T2153NH: This model without shower head
- T62153: Bulk pack version of this model (12 per carton)
Additional Moen Links
Our SKU: T2153
This product is listed under the following manufacturer number(s):
Oil Rubbed Bronze
*Denotes a finish or option that has been discontinued
16 Questions from the Community
Is the shower head on the Moen T2153 metal or plastic?
How do I figure out which of the four valves to order?
A. Here is how the four valves differ. 2510 is IPS (Iron Pipe Size) Threaded Connection - Without Stops. 2520 is CC (Copper to Copper) Sweated / Soldered Connection - Without Stops. 2570 is IPS (Iron Pipe Size) Threaded Connection - With Stops. 2590 is CC (Copper to Copper) Sweated / Soldered Connection - With Stops. Depending on what your plumber or your current plumbing system uses you'll pick CC or IPS. Valve stops allows you to cut water off to your shower valve for repairs.
How do you determine which valve you will need?
Are the sun & snowflake symbols on the chrome shower control? or is it the blue to red swirl?
I'm looking for a drain plug and overflow that will match
what about a drain kit to match?
Would the T2153 be compatible to the Adler L82694? We are building a house and have this presently set in the tile for hookup, but decided we wanted to go with an oil bronze look, but could not find oil bronze in the alder collection. It needs to hook up with the installed plumbing for the alder.
Will this be able to replace a push-pull on off Moen showerhead from the Monticello collection and would I need a new rough in valve?
I would like to control the flow of water, does this handle allow that?
Where is the T2153 manufactured?
I need only the 3857 tub spout and the T2151 handle lever, not the shower valve. I If I buy these two separately it costs more than if I just buy the T2153. Can I just buy the T2153 and NOT use the shower head?
Can I buy this and then replace the shower head with the Moen 6310? Do I just unscrew the shower head to replace?
I bought my bathroom fixtures and notice that the tub spout is a slip fit type. How strong is it to hold the water pressure and not slip off
A. Moen T2153 Single Handle Posi-Temp Pressure Balanced Tub and Shower Trim with Single Function Showerhead from the Brantford Collection does have a set screw on the bottom of the slip fit, which tightens it up to hold it. It is strong enough, there have been no known problems.
I need a replacement cartridge for valve, I'm not getting any hot water, just plenty of cold water?
how do you balance hot & cold at interior fitting
Is the T2153 brushed nickel Moen faucet "nickel" or stainless ? What is the recommended cleaning method ?
Moen Brantford Collection
Other Products In The Moen Brantford Collection
Double Handle Widespread Bathroom Faucet from the Brantford Collection
Double Post Toilet Paper Holder from the Brantford Collection
Single Handle Kitchen Faucet with Reflex Pullout Spray from the Brantford Collection
Single Handle Posi-Temp Pressure Balanced Shower Trim with Single Function Showerhead from the Brantford Collection
Tank Lever from the Brantford Collection
Moen® products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the "Warranty Period" for homeowners), that this faucet will be leak and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial and business use) are warranted for a period of 5 years from the original date of purchase (the "Warranty Period" for non-homeowners). This warranty is applicable only to faucets purchased after December 1995 and shall be effective from the date of purchase as shown on purchaser's receipt. Faucets purchased prior to December 1995, Moen warrants to the original consumer purchaser that this faucet will be leak and drip free during normal domestic use for as long as you own it. If this faucet should ever develop a leak or drip during this time, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition.
Moen warrants to the original consumer purchaser all other aspects of this faucet to be free from defects in material and workmanship for two (2) years from date of purchase except for decorator finishes which are warranted for (1) year from date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.
If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE, any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service. Replacement parts may be obtained by calling 1-800-BUY MOEN (1-800-289-6636), or by writing to the address shown below.
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022
Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.
This warranty is extensive in that it covers replacement of all defective parts and finishes. However, damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty. Moen will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for any indirect, incidental or consequential damages, losses, injury or costs of any nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or of fitness for use.
Some states, provinces and nations do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province, nation to nation. Moen will advise you of the procedure to follow in making warranty claims. Simply write to Moen Incorporated using the address above. Explain the defect and include proof of purchase and your name, address, area code and telephone number.