Contact for Pricing
We want to help make your remodel easy and affordable! Please call or chat during business hours using the links at the top of our site to take advantage of this special offer
Offer Ends 11/30/2015
|Manufacturer Warranty||Limited Lifetime|
Shower arm flange
- 2 1/2" Outer Diameter
- 3/4" Inner Diameter
Additional Moen Links
Our SKU: AT2199
This product is listed under the following manufacturer number(s):
- Antique Bronze
- Antique Nickel
- Brushed Bronze
- Brushed Nickel
- Brushed Platinum
- Classic Brushed Nickel
- Classic Gold
- Oil Rubbed Bronze
- Polished Brass
- Wrought Iron
*Denotes a finish or option that has been discontinued
6 Questions from the Community
The Moen AT2199 is stamped brass with a finish over it.
is it metal or plastic?
A. The Moen AT2199 is stamped brass with a finish over it.
The Moen at2199 Shower Arm Flange has a 2-1/2" diameter and a 3/4" inside diameter.
Dimensions of inner and outer diameters please?
A. The Moen at2199 Shower Arm Flange has a 2-1/2" diameter and a 3/4" inside diameter.
The Moen AT2199 is the flange for the Monticello collection.
Does this part fit the Monticello Shower?
A. The Moen AT2199 is the flange for the Monticello collection.
The Moen at2199 is 2.5 inches in diameter.
What is the circumference?
A. The Moen at2199 is 2.5 inches in diameter.
The Moen AT2199 is 2 1/2 inch diameter...finding a 3 1/2 inch is going to be a little harder. But I found one! It is the Delta RP34356...It comes in chrome and stainless steel. I am sending you an email with the infromation...I hope this helps! Thank you and let me know if there is anything else I can do to help you!
Can I get an oversized flange to cover up a ceramic tile mistake? Like 3 1/2"?
A. The Moen AT2199 is 2 1/2 inch diameter...finding a 3 1/2 inch is going to be a little harder. But I found one! It is the Delta RP34356...It comes in chrome and stainless steel. I am sending you an email with the infromation...I hope this helps! Thank you and let me know if there is anything else I can do to help you!
The Moen AT2199's depth of the flange has a diameter of 2-1/2w" and 1/2"h(sitting on a table).
What is the depth of the flange?
A. The Moen AT2199's depth of the flange has a diameter of 2-1/2w" and 1/2"h(sitting on a table).
Moen Moen Shower Collection
Other Products In The Moen Moen Shower Collection
5ft. Fixed-Length Curved Shower Rod (Wholesale Packaging)$26.70-$34.35(18)
1-1/2" Threaded Tub Drain Kit with Push-N-Lock Dra...$17.91-$62.10(50)
8" Rainshower Head$168.19-$277.99(1)
Adjustable Body Spray$50.58-$69.57(6)
Drop Ell Wall Supply Elbow$9.00-$42.42(28)
Moen® products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the "Warranty Period" for homeowners), that this faucet will be leak and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial and business use) are warranted for a period of 5 years from the original date of purchase (the "Warranty Period" for non-homeowners). This warranty is applicable only to faucets purchased after December 1995 and shall be effective from the date of purchase as shown on purchaser's receipt. Faucets purchased prior to December 1995, Moen warrants to the original consumer purchaser that this faucet will be leak and drip free during normal domestic use for as long as you own it. If this faucet should ever develop a leak or drip during this time, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition.
Moen warrants to the original consumer purchaser all other aspects of this faucet to be free from defects in material and workmanship for two (2) years from date of purchase except for decorator finishes which are warranted for (1) year from date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.
If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE, any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service. Replacement parts may be obtained by calling 1-800-BUY MOEN (1-800-289-6636), or by writing to the address shown below.
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022
Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.
This warranty is extensive in that it covers replacement of all defective parts and finishes. However, damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty. Moen will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for any indirect, incidental or consequential damages, losses, injury or costs of any nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or of fitness for use.
Some states, provinces and nations do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province, nation to nation. Moen will advise you of the procedure to follow in making warranty claims. Simply write to Moen Incorporated using the address above. Explain the defect and include proof of purchase and your name, address, area code and telephone number.