Moen A725AN Antique Nickel Drop Ell Wall Supply Elbow

Item #: BCI1030238
$40.20
Originally $67.00, You Save 40%
Shipping: Free Shipping on orders over $99.00! See Details
Ships In:
Availability based on Finish selected
Finish:
Antique Nickel
Stock:
13 In Stock
Quantity:
 

Discontinued

Please finish configuring product before adding to cart

Technical Specs

Connection Size 0.5
Connection Type IPS
Height 2.125
Installation Type Wall Mounted
Length 1.85
Manufacturer Warranty 1 Year Limited
Material Metal
Moen Product Level Basic
Theme Modern
Width 1.85

Product Features:

  • Covered under Moen's 1 Year limited lifetime warranty
  • Premier finishing process - finishes will resist corrosion and tarnishing through everyday use
  • For use with hand shower applications not directly connected to shower arm diverter
  • Supply elbow constructed of metal
  • 1/2" threaded male connection
  • For use with standard hand shower hoses
  • Secure mounting assembly

Additional Moen Links

Our SKU: A725

This product is listed under the following manufacturer number(s):

  • Antique Bronze
    A725AZ
  • Antique Nickel
    A725AN
  • Brushed Bronze
    A725BB
  • Brushed Nickel
    A725BN
  • Chrome
    A725
  • Classic Brushed Nickel
    A725CBN
  • Hammered Nickel
    A725HN
  • Nickel
    A725NL
  • Oil Rubbed Bronze
    A725ORB
  • Pewter
    A725PW
  • Platinum
    A725PM
  • Polished Brass
    A725P
  • Satine
    A725ST
  • Wrought Iron
    A725WR

*Denotes a finish or option that has been discontinued

6 Questions from the Community

  • The Moen A725 screws on to a standard 1/2" male threaded pipe.

    Is there a special pipe connection for the Moen A725 elbow?

    A. The Moen A725 screws on to a standard 1/2" male threaded pipe.

  • The Moen A725 elbow's connection to the wall will be female threaded.

    Is the connection female or male threaded?

    A. The Moen A725 elbow's connection to the wall will be female threaded.

  • The Moen A725 is designed to only be screwed into the pipe, pressed snugly against the wall to prevent water from getting behind it.

    What keeps water from getting behind the elbow?

    A. The Moen A725 is designed to only be screwed into the pipe, pressed snugly against the wall to prevent water from getting behind it.

  • The Moen A725 is designed to only be screwed into the pipe, pressed snugly against the wall to prevent water from getting behind it.

    What keeps water from getting behind the elbow?

    A.

    The Moen A725 is designed to only be screwed into the pipe, pressed snugly against the wall to prevent water from getting behind it.

  • The Moen A725 screws on to a standard 1/2" male threaded pipe.

    Is there a special pipe connection for the Moen A725 elbow?

    A. The Moen A725 screws on to a standard 1/2" male threaded pipe.

  • The Moen A725 elbow's connection to the wall will be female threaded.

    Is the connection female or male threaded?

    A. The Moen A725 elbow's connection to the wall will be female threaded.

Product Reviews

Rated 5 out of 5 by from Moen A725 Wall Supply Elbow A required piece for the 4 function shower with slide bar. The oil rubbed bronze finish matches all the other Moen fixtures. The installation is simple. However, you should be aware that the flange that goes against the tile wall is much smaller than a normal shower head flange. You should be aware of this when the tile is cut around the water supply line. My tile man made the cut too big and had to replace the tile. Moen should standardize the size of their flanges. The product looks great though.
Date published: 2012-07-12
Rated 4 out of 5 by from Nipple Length Solution Concur with other reviews re. the nipple length issue and getting it flush with the finished tile. There is a shower arm flange (Moen AT2199; $12.00) that worked great for me as the 2" nipple was too short and the 2.5" nipple was too long. It compresses to take up the slack which was nice and really looks good if not better than the elbow alone. As with other reviews, tightening it takes some thought as well. Moen should really re-engineer this one.
Date published: 2013-06-26
Rated 4 out of 5 by from Difficult to work with It was extremely difficult to flush this piece with the shower wall. There always was a large gap between the wall and the wall supply elbow, especially after the vacuum breaker was attached to it. We contacted Moen, and they said that the water pipes had to be perfectly perpendicular to the wall to make this piece lay flat against the wall because even a couple degrees off will create the gap. My husband ended up slightly bending the vertical portion of the water pipe because it would be too much trouble cutting off the pipes and welding them again. Now it looks right and nice. Make sure that your plumber knows what he is doing(ours did not, so after we fired him we had to figure out everything by ourselves).
Date published: 2012-03-30
Rated 2 out of 5 by from Nice but not worth it This is a nice piece but it is not worth it. It's just a threaded angle fitting. It is overpriced. There are better alternatives. Some two piece assemblies are better for positioning. Higher quality pieces can be purchased for less money.
Date published: 2012-04-04
Rated 4 out of 5 by from Make sure you leave room Make sure you leave room for the piece to be spun when installing it. I almost put it too close to a raised tile trim piece.
Date published: 2008-11-05
Rated 3 out of 5 by from Just OK I bought this because it was nice and simple looking but the install has not been so if you like your stuff to look nice and tight against the wall and not leak you better hope for the best. This required a nipple to connect it which the only nipples I found came in 1/2" incriments which one put it to far out from the wall and the other didn't tighten like i wanted it to
Date published: 2010-06-03
Rated 5 out of 5 by from hand held shower flange This looks a lot better than the fitting that would have just stuck out from the wall! It was a little tricky getting the right size nipple to make it flush with the wall but not diffcult. Looks great and the hose hangs off bottom and is a cleaner look!
Date published: 2012-07-02
Rated 5 out of 5 by from Wall Supply Elbow - Satin Nickel Worked well & matched well with my separatly purchased Moen Hand Shower. This is a brass plated product, so make sure and use a brass nipple to connect to your copper water supply. Nipple length is a challange to estimate (I used a 1" for my application, which included travertine tile and hardy board interface). Be careful not to tweek the brass when tightening. Use Teflon on both sides, and I used a pipe connected to the output to tighten.
Date published: 2013-01-08

Moen

Moen’s fascination with water catalyzed thoughtful design, meaningful innovations and exceptional reliability in plumbing fixtures. Over the past five decades, Moen’s faucets and plumbing fixtures established themselves as a top manufacturer worldwide. For the customer looking for professional plumbing fixtures, at an affordable price, Moen manufactures only the best quality and functionality.

Moen Moen Shower Collection

From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design

Other Products In The Moen Moen Shower Collection

View all 52 products in Moen Moen Shower Collection

Warranty Info

Moen Limited Lifetime Warranty

Moen® products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the "Warranty Period" for homeowners), that this faucet will be leak and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial and business use) are warranted for a period of 5 years from the original date of purchase (the "Warranty Period" for non-homeowners). This warranty is applicable only to faucets purchased after December 1995 and shall be effective from the date of purchase as shown on purchaser's receipt. Faucets purchased prior to December 1995, Moen warrants to the original consumer purchaser that this faucet will be leak and drip free during normal domestic use for as long as you own it. If this faucet should ever develop a leak or drip during this time, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition.

Moen warrants to the original consumer purchaser all other aspects of this faucet to be free from defects in material and workmanship for two (2) years from date of purchase except for decorator finishes which are warranted for (1) year from date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.

If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE, any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service. Replacement parts may be obtained by calling 1-800-BUY MOEN (1-800-289-6636), or by writing to the address shown below.

    Moen Incorporated
    25300 Al Moen Drive
    North Olmsted, Ohio 44070-8022

Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.

This warranty is extensive in that it covers replacement of all defective parts and finishes. However, damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty. Moen will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for any indirect, incidental or consequential damages, losses, injury or costs of any nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or of fitness for use.

Some states, provinces and nations do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province, nation to nation. Moen will advise you of the procedure to follow in making warranty claims. Simply write to Moen Incorporated using the address above. Explain the defect and include proof of purchase and your name, address, area code and telephone number.


Recently viewed items