MinkaAire WC212 Wall Mounted Remote Control System for MinkaAire Ceiling Fans
Item #:
BCI905588
Compare Our Prices
Technical Specs
| Theme | Functional |
Configure your Wall Mounted Remote Control System for MinkaAire Ceiling Fans
-
Component Required
Finish configuring above to see price
Please finish configuring above
- Enjoy the convenience of remote control for your ceiling fan
- Remote allows for adjustment of your ceiling fan''s speed in forward and reverse and it''s light intensity for up and downlight
- Ivory and White faceplates included
Additional MinkaAire Links
- View Manufacturer Warranty
- Shop All MinkaAire Products
Our SKU: WC212
This product is listed under the following manufacturer number(s):
- WCS212
White / Ivory
*Denotes a finish or option that has been discontinued
28 Questions from the Community
-
Does a remote control for this have to be purchased separately?
-
If you do not use the wc212 unit and wire the fran to a three speed fan dehummer switch nd the light to a separate switch how do you reverse the fan direction?
-
Will the WC212 work for my Minka Aire Concept F516-BN?
-
We have the Taos by Minka Aire and with the touch control for model WC 220. Upon pulling the unit out of the walll it shows model # UG9040T. I need to know what control to purchase as ours shorted out.
-
Will this replace a wlc700?
-
I have one of the older models of F516. Specifically my fan model is Model AC525 (F516) "BB". I believe it came with remote control model RC588TW. Will this wall control work with my fan?
-
We are in need of a wall transmitter. Is this the same piece for the traditional gyro?
-
what is the difference between wc212 and wc223?
-
I have an Acero F601 and an F518. Both run with an UC-9051 wall transmitter and an UC-7067RC receiver. Can I replace my old wall transmitter with the WC212?
-
Just bought a replacement wc212 and P001022500 receiver for my Minka Aire Artemis fan followed the installation instructions but fan won't work I have three switches in this room is the wall control suppose to take up one space or two and how do I know when the wall controls and receiver are synced?
-
Bought wc212 and p001022500 followed installation instructions not sure if wall control should take up two wall switches or one and how do I know if the receiver and control are synced ?
-
how do I wire this
-
for remote wc212 there a two black wires both say not to connect to the white ground wire but wiring in my wall is one black one white how do I connect
-
I'd like to mount a Gyro 42" where a light on a three way switch was originally intended to go. What accomodations do i I have to make for the WC212? Is it wireless, low voltage or go in place of a regular wall switch ?
-
is this a universal remote that will interface with other manuf?
-
what is correct remote system for model F402-orb 42" gyro
-
Is this the right switch for a Model F602 Gyro Fan?
-
I recently bought the WC212 as a replacement wall remote for my ceiling fan model AC-552(F601). However, the reciever and transmitter frequency setting mechinisms don't match. What is the correct wall unit model number I should order?
A. To determine what wall control you will need you want to look at your exhisting control. The led light will be either red or green. If it is green you need model WC212, if it is red you need model WC210. Minka happens to sell two types of these wall controls but they are specific to the receiver you are trying to use them with.
-
If used with a MinkaAire Concept II fan with light, can the WC212 turn the light off and on without also turning on the fan?
-
Do I have to buy a remote and a receiver?
-
Do I need two units if I have two fans in same room and want to control with one switch
-
Does WC212 include a receiver?
-
Will this control work with MinkaAire F648?
-
What is the procedure for switching frequencies on the receiver units when you are encountering interference?
A. You are going to have to remove cover from wall and there should be 4 switches on the back, set them in any sequence and then on the fan there is a receiver which looks like this: http://www.lightingdirect.com/tommy-bahama-tbsw03-electronic-fan-control-from-the-tommy-bahama-receiver-collection/p986537 Set the switches on this to that same frequence.
-
I have two fans wired to a WC212, they turn in opposite direction. What can I do to make them turn in the same direction?
-
Does the WC212 have to be hardwired to the fan (MinkaAire Concept II 44).
-
What size wall mox does the WCS212 need? Will it mount in a standard outdoor single gang box?
-
Can this switch be used for 3-way wiring of the fan? Would I need 2 switches?
Product Reviews
Wall Mounted Remote Control System for MinkaAire Ceiling Fans
2
2
handy device
I bouht this remote wall switch with the new ceiling fan from Lighting Direct.The remote works great once installed but that was easier said than done. It seems that this remote is too large in height to install in some steel wall boxes. I had to grind the steel wall box with Dremil Tool grinder so the remote would fit the box. Newer plastic boxes may not be an issue.
October 9, 2011
Works with our Concept II's
We bought a pair of these to have permanent wall controls for the Minka Aire Concept II fans in our bedrooms. It's significantly smaller than the handheld remote control that comes with the Minka Aire fans (as it is designed to fit in a Decora-style lightswitch cover), but otherwise works essentially the same way. It's a little cheesy looking and you have to show guests how it works before they can figure it out, but it definitely works.
April 24, 2011
1-2 of 2
MinkaAire
Minka Aire proudly presents their most comprehensive and exciting collections of fans available anywhere. Within our online Minka Aire catalog you will find an unparalleled combination of form, function and design. From the contemporary to the classically styled, every Minka Aire fan has been engineered for superior performance and to provide maximum comfort in even the largest rooms. Minka Aire has something for every décor and budget.
Warranty Info
Warranty
All products are warranted to be free of defects in material and workmanship for one (1) year from date of purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided that: (a) we are properly notified and consent to the return of the item(s) in question: (b) the item(s) is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above. This warranty does not cover labor costs, consequential damages, nor does it apply to any item(s) that have been improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s). Finishes are specifically excluded from the terms of this warranty since they are subject to environmental maintenance dames beyond our control. Other than the described obligation, we assume no further liability with respect to the sale or use of our products. We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness for a particular purpose.
All products are warranted to be free of defects in material and workmanship for one (1) year from date of purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided that: (a) we are properly notified and consent to the return of the item(s) in question: (b) the item(s) is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above. This warranty does not cover labor costs, consequential damages, nor does it apply to any item(s) that have been improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s). Finishes are specifically excluded from the terms of this warranty since they are subject to environmental maintenance dames beyond our control. Other than the described obligation, we assume no further liability with respect to the sale or use of our products. We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness for a particular purpose.
