Kraus KTM32 Stainless Steel 33" Drop In 60/40 Double Bowl 18 Gauge Stainless Steel Kitchen Sink

Item #: BCI1870888

5% Off all Kraus Products

Use Coupon Code: krausfive
Offer Ends 9/5/2014

$279.95
Originally $700.00, You Save 60%
Shipping: Free Shipping! See Details
Ships In:
Ships Tomorrow, September 3rd
Finish:
Stainless Steel
Stock:
30 In Stock
Quantity:
 

Discontinued

Please finish configuring product before adding to cart

Technical Specs

Specification Sheet / Installation Guide
Basin Depth (Left) 9
Basin Depth (Right) 8
Basin Length (Left) 15.75
Basin Length (Right) 13
Basin Rack Included No
Basin Split 60/40
Basin Width (Left) 18.75
Basin Width (Right) 16.5
Basket Strainer Included Yes
Drain Connection 3.5
Drain Placement Rear
Farmhouse No
Faucet Centers 0
Faucet Hole Size 1.375
Faucet Holes 1
Gauge 18
Height 9
Installation Type Drop In
Length 33
Material Stainless Steel
Number Of Basins 2
Product Weight 16.9
Sink Material Stainless Steel
Sink Shape Oval
Sound Dampening Yes
Theme Traditional
UPC Approved Yes
Width 22

Product Features:

  • Fully covered under Kraus' limited lifetime warranty
  • Constructed of 18 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrode
  • Commercial-grade satin finish - highly scratch and stain resistant
  • Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use
  • Double bowl (60/40 split) 33" sink with traditional rounded corners
  • Extra deep (9" depth) design is perfect for the semi-professional kitchen
  • Undermount installation; fits 37+" cabinets
  • Standard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)

Product Specifications:

  • Height: 9" ( measured from the bottom of sink to the top of the rim)
  • Overall Width: 22" (measured from the back outer rim to the front outer rim)
  • Overall Length: 33" (measured from the left outer rim to the right outer)
  • Basin Width (Left): 18-3/4" (measured from the back inner rim to the front inner rim)
  • Basin Width (Right): 16-1/2" (measured from the back inner rim to the front inner rim)
  • Basin Length (Left): 15-3/4" (measured from the left inner rim to the right inner rim)
  • Basin Length (Right): 16-1/2" (measured from the left inner rim to the right inner rim)
  • Basin Depth (Left): 9" (measured from the center of basin to the rim)
  • Basin Depth (Right): 8" (measured from the center of basin to the rim)
  • Installation Type: Drop in
  • Number of Faucet Holes: 1
  • Drain Outlet Connection: 3-1/2"
  • Minimum Base Cabinet Width: 37"

What's Included:

  • Kraus 18 gauge Stainless Steel sink
  • Stainless steel basket strainer (sink drain assembly)
  • Mounting and installation brackets
  • Sink cutout template (for countertop cut dimensions)
  • Dish towel with Kraus logo
  • Specification Sheet / Installation Guide

Advantages of Stainless Steel over Enameled Cast Iron or Fireclay:

  • Very durable; will never chip or crack
  • Dishes usually don't break when dropped during dish washing
  • Due to relative weights, stainless steel is generally much easier (and less expensive) to install
  • Nonporous; resists bacteria
  • Neutral color fits into almost any décor - matches stainless steel appliances

Product Technologies / Benefits:

  • Premium Grade T-304 Stainless Steel: There are two primary types of stainless steel in the market: T-409 and the higher quality T-304. The difference lies in chromium and nickel contents; T-409 with 11% and .5% respectively, T-304 with 18% and 10%. When added to steel, these two metals prevent oxidation and rust by neutralizing sodium chloride (salt) – a common element in everyday kitchens. While cheaper sinks use T-409, Kraus sinks boast T-304, further lending to the lifetime warranty.
  • Sound Insulated: Sound insulated steel is commonly only thought of in the automobile industry. There, auto manufacturers use spray-on “Stone Guard” insulation to provide for a quieter ride and protect the steel. Borrowing this technology and adding to it, Kraus sinks use Stone Guard insulation, sprayed over rubber sound dampening pads to create a noticeably lower-tone and overall quieter kitchen sink. It also protects your cabinet from underside condensation drips.
  • Heavily Certified: Kraus has gone to great lengths to be able to provide you, the homeowner, the rest-easy satisfaction knowing that your sink is certified and listed by all the major product testing boards in the U.S. and Canada. This means that this sink is deemed safe to use and that it meets all applicable building codes. Certifications and listings include: UPC, cUPC, CSA, IAPMO, ANSI and SCC.

Additional Kraus Links

Our SKU: KTM32

This product is listed under the following manufacturer number(s):

  • Stainless Steel
    KTM32

*Denotes a finish or option that has been discontinued

4 Questions from the Community

  • The Kraus KTM32, 60/40 drop-in model is only available with a single faucet hole option. 

    Is this available with two holes?

    A.

    The Kraus KTM32, 60/40 drop-in model is only available with a single faucet hole option. 

  • Thank you for your question the Kraus KTM32 will have a cut out size of 32" on the granite and the depth (front to back) is 22". Before installation we would recommend talking to an installer/technical representative to be sure the cut out size will be 110% for your specific application.

    What is the minimum cut out opening required for installation?

    A. Thank you for your question the Kraus KTM32 will have a cut out size of 32" on the granite and the depth (front to back) is 22". Before installation we would recommend talking to an installer/technical representative to be sure the cut out size will be 110% for your specific application.

  • The Kraus KTM32 is manufactured with 18 gauge steel.

    What gauge is this sink?

    A. The Kraus KTM32 is manufactured with 18 gauge steel.

  • Model numbers  KBG-24-1 and KBG-24-2 sink grids will fit the Kraus KTM32. 

    What sink grids fit the model KTM32 top mount 55/45 sink?

    A.

    Model numbers  KBG-24-1 and KBG-24-2 sink grids will fit the Kraus KTM32. 

Product Reviews

Rated 5 out of 5 by from good quality sink This sink is very good quality for the price. It is easy to keep clean by just keeping it wiped down after each use with a towel. It is also constructed with a good grade of stainless steel, which makes the sink very solid and not flimsy. The sink is insulated on the underside to keep down on noise when water is running into the sink.
Date published: 2013-09-28
Rated 5 out of 5 by from
Date published: 2014-03-19
Rated 4 out of 5 by from had to remanufacture clips clips were useless had to re-manufacture to get them to work these two have installed sinks and were cursing about clips and screws l
Date published: 2014-04-23
Rated 1 out of 5 by from Junk! Mounting flange bowed at the corners; won't sit flush! Installation clips cheap & poor design. Cut-out template is larger than a standard! Good luck installing a different sink later. I'll be calling for a RGA number.
Date published: 2014-08-14

Kraus

Kraus redesigned several plumbing industry standards and focused on modern plumbing style. Offering an extensive selection of faucets and sinks, Kraus aims to provide quality and handmade plumbing fixtures to its customers. For plumbing that balances durability with aesthetics, Kraus keeps its luxurious products at an affordable price.

Kraus Kitchen Sink Collection

No other brand does sleek and strong better than Kraus. The Kraus Kitchen Sink collection offers a vast selection of premium stainless steel sinks for everything from the single chef kitchen to the kitchen built to host large family dinners. Kraus kitchen sinks are made from commercial grade 16 gauge stainless steel to handle the daily wear and tear of a bustling kitchen. Homeowners are guaranteed rust resistant surfaces, reliable performance, and superior durability. In addition to quality craftsmanship, most Kraus kitchen sinks come with bonus accessories including an industrial sized basket strainer, sink grid, and signature Kraus dish towel. Available in an assortment of single bowl and double bowl configurations, the Kraus Kitchen Sink Collection has a fit for every lifestyle.

Other Products In The Kraus Kitchen Sink Collection

View all 36 products in Kraus Kitchen Sink Collection

Warranty Info

All KRAUS products undergo a rigorous quality control process. We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. KRAUS Brand Limited Lifetime Warranty If a product fails due to material or craftsmanship error during the warranty period, KRAUS will repair or replace the items at our discretion. We define the warranty period as the length of time that the owner of the product owns the first home where the Kraus product is installed. Warranties are not transferable, between homes or owners and are only applicable to residential use. Commercial use will automatically void the warranty. To make a warranty claim, the original sales receipt must be presented, without exception. Like other home fixtures, Kraus products will require light maintenance to ensure proper function. We provide you with complete knowledge to perform this maintenance and can also recommend resources if you are unable to fulfill this service. Kraus will not be responsible for product failures due to lack of maintenance. Kraus recommends installing all Kraus products with a licensed, professional plumber. We will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to use a licensed professional. Please read your care and maintenance documentation to determine the limits of proper use. By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product. This includes freight costs, cartridge replacement, labor, travel time, lost profit, home damages and other contingent liabilities and costs (including, without limitation, costs associated with experts, investigations, analyses, attorneys and other professionals and services). The Kraus warranty is a comprehensive and explicit limit of liability, and all items outside of it are not addressable by, or the responsibility of Kraus. Certain states have variances regarding implied warranties and in those situations we remain fully compliant. KRAUS USA Inc. makes no implication that products comply with any or all local building or plumbing codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to the original purchaser and first consumer. Replacement parts may be obtained by calling 1-800-775-0703 or by writing: KrausUSA 12 Harbor Park Drive, Port Washington, NY 11050
Recently viewed items
  • Kraus KTM32
    Kraus KTM32

    33" Drop In 60/40 Double Bowl 18 Gauge S...