|Door Thickness||1-1/2", 1-3/8"|
1 3/4" x 2 1/4" Sliding Door Lock for Doors 1 3/8" to 1 1/2" Thick
This sleek 1 3/4" x 2 1/4" sliding door lock for doors 1 3/8" to 1 1/2" thick gives any sliding door the security of a lock and a stylish look with its decorative coined edges. The plates can be reversed if the door opens right to left.
- Fits Doors 1 3/8" to 1 1/2" Thick
- Decorative Coined Edges
- Pre-Assembled for Doors Opening Left to Right Plates Are Reversible
- Body, Turn Knob and Strike Made From Solid Brass
- Depth: 1 3/4"
- Height: 2 1/4"
IVES has produced a full line of quality building hardware for over 120 years Throughout this time, IVES has adhered to the firm convictions of its founder, Hobart B Ives, that the success of a company is dependent on two major factors — product quality and customer service Today, IVES reputation is known for these core principles Emphasis is also placed on application flexibility and value IVES extensive hardware line includes a variety of pivots, flush bolts, push/pull handles, kick plates, doorstops, hinges and more
Additional Ives Links
Our SKU: 991B
This product is listed under the following manufacturer number(s):
Oil Rubbed Bronze
Satin Nickel Blackend
*Denotes a finish or option that has been discontinued
2 Questions from the Community
How do I get the strike plate for the opposing wall?
I have a pair of pocket doors that meet in the center of the opening. How can I have a pull on each door and secure the doors together when closed?
Ives (the "Company") warrants only to Customer that the products will be free from defects in material and workmanship for a period of 12 months from the date of shipment of the products. The Customer shall be obligated to promptly report any failure to conform to this warranty in writing to the Company within the warranty period provided above. Company’s sole obligation under this warranty is limited to repairing or replacing, at its option, the defective products.
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE PRODUCTS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The provisions of this limited warranty do not apply to products: (i) used for the purposes for which they are not designed or intended; (ii) which have been repaired or altered without Company's prior written consent; (iii) which have been subjected to misuse, abuse, negligence, or accident; (iv) which have been improperly stored, installed, maintained, or operated; (v) which have been used in violation of written instructions provided by Company to Customer; (vi) which have been subjected to improper temperature, humidity, or other environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, based on Company's examination, do not disclose to Company's satisfaction nonconformance to the warranty.
The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to Company;(iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material(products only) or workmanship.
CONSUMER PRODUCTS. With respect to "consumer products" as defined under the Magnuson-Moss Warranty Act ("MMWA"), the following statements are made. (a) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (b) Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and you may also have other rights which vary from state to state.