FanTech PB110H Premium Bathroom Exhaust Fan with Dimmable Halogen Light, 110 CFM, 4" Duct

Item #: BCI1106422
Discontinued
Originally $211.20
Originally $264.00, You Save 20%

We still have product details, accessories, and reviews below, scroll down to see them!

Technical Specs

Installation Sheet
Amperage 1.8
Bulb Type Halogen
CFM (High) 110
Collection PB
Configuration Fans
Duct Size 4" Round
Energy Star Yes
Housing Height 6.5
Housing Length 7.1875
Housing Width 8.75
HVI Certified No
Installation Type In-Line
Light Included Yes
Series PB
UL Listed Yes
Voltage 115
Wattage 20
Watts Per Bulb 50

Premium Bath Fan with Dimmable Halogen Light

  • 110 CFM
  • One ceiling grille with light, grille housing with damper
  • 50 watt halogen bulb (included)
  • Uses 4" duct
  • UL listed for wet locations

Additional FanTech Links

Our SKU: PB110H

*Denotes a finish or option that has been discontinued

10 Questions from the Community

  • Can the light be independently operated from the fan?

    A. Yes, the FanTech PB110H exhaust fan can be wired to operate the light and fan separately.

    57% of 42 people found this useful. Was this useful? yes (24) | no (18)
  • Is the housing rated IC (direct insulation contact)?

    A. The FanTech PB110H housing is housing rated IC (direct insulation contact).

    50% of 6 people found this useful. Was this useful? yes (3) | no (3)
  • How many sones is the pb110?

    A. This product has an exterior or inline fan. The fan is designed to be installed away from the grille so that noise is significantly reduced. Due to the variety of installation options this allows it does not have a sone rating. Depending on your insulation and the distance away from the room/s you install it, the less you will be able to hear it.

    56% of 9 people found this useful. Was this useful? yes (5) | no (4)
  • What diameter is the grille of the PB110H?

    A. The grille on the FanTech PB110H measures 7" in diameter.

    75% of 4 people found this useful. Was this useful? yes (3) | no (1)
  • Can any conventional wall-switch dimmer work with this halogen light?

    A. You will need a halogen specific dimmer switch to go with The FanTech PB110H.

    40% of 5 people found this useful. Was this useful? yes (2) | no (3)
  • is there a special switch you can buy for teh dimmable halogen light and fan?

    A. A conventional dimmer switchwill work.

    33% of 6 people found this useful. Was this useful? yes (2) | no (4)
  • Is there a special switch you can buy for the dimmable switch and fan?

    A. The FanTech PB110H does not need a special control but can be used with a P2630.

    67% of 3 people found this useful. Was this useful? yes (2) | no (1)
  • Can it be used with a Leviton RTD01-10I IllumaTech 1.5A 300W Rotary Combo Fan Speed Dimmer Control, Single-Pole?

    A. The FanTech PB110H should be used with a fan/light controller rated to at least 5 Amps. The Leviton controller you mentioned is designed for bladed ceiling fans that have much lower power requirements and is not suitable for use with the FanTech PB110H.

    75% of 4 people found this useful. Was this useful? yes (3) | no (1)
  • How many sones?

    A. The FanTech PB110H is designed to be installed away from the grille so that noise is significantly reduced. Due to the variety of installation options this allows, it does not have a sone rating.

    25% of 4 people found this useful. Was this useful? yes (1) | no (3)
  • Can this unit be mounted on the ceiling right above shower, it's a dark area (can light handle moist area)?

    A. Yes, this is UL listed for wet locations, and can be installed above a shower.

    89% of 9 people found this useful. Was this useful? yes (8) | no (1)

Product Reviews

Warranty Info

Fantech Warranty

EXCEPT AS EXPRESSLY STATED IN THIS AGREEMENT

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE. FANTECH DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AS TO BOTH FANTECH AND NON FANTECH PRODUCTS. FANTECH’S WARRANTIES EXTEND SOLELY TO ITS CUSTOMER. FANTECH WILL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF USE, REVENUES, PROFITS OR SAVINGS, EVEN IF FANTECH KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES.

Equipment Warranty and Disclaimers:

  • Subject to conditions (b) through (h) below, Fantech warrants that Equipment sold by it will be free from defects in material and workmanship during the Warranty Period. During the Warranty Period, Fantech will repair or replace any defective item of Equipment or part or component of Equipment, promptly sent to Fantech by Customer, which Fantech determines was defective due to faulty material or workmanship. “Warranty Period” means the period stated to be such on the operations manual;
  • Because Equipment requires ongoing maintenance, the preceding warranty is void if the maintenance specified by Fantech as required maintenance has not been performed, as determined by Fantech;
  • This Warranty is void if the Fantech label control number or date of manufacture, which is affixed to the Equipment, has been removed or altered in any way;
  • This Warranty does not apply to damage occurring after Fantech shall have delivered the Equipment to a shipper. If damage, whether concealed or visible, has been caused by shipping, Customer must file a claim with the freight company;
  • This Warranty does not apply to damages resulting from improper wiring or installation, or resulting from improper consumer procedures such as lack of proper maintenance, misuse, abuse, abnormal use, use by an application other than one recommended by Fantech, or accident or application of incorrect electrical voltage or current;
  • This Warranty does not apply to damage or failure caused by any cause beyond the control of Fantech, including acts of God, war, terrorism, riot, or insurrection;
  • In no event will Fantech be liable for claims, demands, or actions against Customer by any person except as provided in Section 3;
  • The entire liability of Fantech and Customer’s exclusive remedy for any defective, non-Fantech products provided under this Agreement is limited to their return to Fantech within 90 days after shipment for refund of the amount paid to Fantech for such products (not including any amounts paid for related services).

Warranty Claim Procedure.

  • Customer will pay transportation and insurance costs to ship Equipment if an offsite inspection and repair location is designated by Fantech. Fantech will pay the return costs if the Equipment was defective. Labor costs of diagnosis are not included in this Warranty.

Warranty Validation

The user must keep a copy of the bill of sale to verify purchase date.

These warranties give you specific legal rights, and are subject to any applicable consumer protection legislation. You may have additional rights which vary from state to state.

Your recently viewed items
Your Customer Code: 84-2C0SRJ4