Item # bci1323273

Emtek Sandcast Bronze Double Cylinder Keyed Entry Set with Rectangular Rose

Model: 7561MB

from the Sandcast Rectangular Collection
Write a Review
$235.20
Finish: Choose Finish
  • Flat Black
  • Medium Bronze
  • Flat Black
    Flat Black
    $235.20
    Special Order
  • Medium Bronze
    Medium Bronze
    $235.20
    Special Order

Special Order
Configure Your Emtek 7561 Sandcast Bronze Double Cylinder Keyed Entry Set with Rectangular Rose

  • Backset

    The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
    Please Select One

  • Door Thickness

    Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
    Please Select One
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One

  • Handing

    Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
    Please Select One

  • Latch Type

    Most residential doors are mortised for either a round corner or square corner latch. Drive-in latches do not have a faceplate and are generally used on hollow doors.
    Please Select One

  • Handle Style

    There are Handle Style options available for this product. Selecting one is required to complete the unit. Mouse over text for image of the option.
    Please Select One
$235.20

Product Overview

double-cylinder-mortise-functionDouble Cylinder Keyed Entry Function: Double cylinder trim requires a key to unlock the mechanism on both the interior and exterior sides of the door. Double cylinder locks can pose a safety hazard in times of emergency due to requiring a key to unlock from the inside; please check local codes before installing.

Features:

  • Constructed from heavy duty cast bronze, offering a tough and lasting material
  • Can be configured to Left or Right handed doors at time of purchase. Please select
  • Installation is quick and simple with basic tools and included template
  • Square corner and round corner latches available upon selection
  • All Emtek products include a limited lifetime warranty

Specifications:

  • Backset: 2-3/8", 2-3/4"
  • Cross Bore: 2-1/8"
  • Edge Bore: 1"
  • Door Thickness: 1-1/2" to 2-3/4"
  • Height: 8-7/8"
  • Width: 2-1/2"
  • Latch Faceplate: Round Corner, Square Corner
  • Cylinder: 5 Pin Schlage C
  • Material: Bronze

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8"
Center to Center
5.5 in.
Cross Bore
2-1/8"
Door Thickness
1-1/2", 1-3/4", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8"
Edge Bore
1"
Height
8.875 in.
Width
2.5 in.

Characteristics and Features

Full Backplate
Yes
Function
Double Cylinder
Handing
Left, Reversible, Right
Handle Material
Metal
Handle Style
Knob, Lever
Keyway
C
Material
Bronze
Shape
Round
Style
Transitional
Theme
Traditional

Warranty and Product Information

ANSI Certification
A156.2
Approved for Commercial Use
No
Collection
Sandcast Bronze
Series
Sandcast Rectangular