Item # bci595519

Emtek Lafayette Keyed Entry Single Cylinder Sectional Handle Set

Model: 461212SS

from the Lafayette Collection
(2)— Write a Review
$316.80
Finish: Choose Finish
  • Satin Steel
  • Satin Steel
    Satin Steel
    $316.80
    Special Order

Special Order
Configure Your Emtek 461212 Lafayette Keyed Entry Single Cylinder Sectional Handle Set

  • Backset

    The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
    Please Select One

  • Door Thickness

    Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
    Please Select One
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One

  • Handing

    Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
    Please Select One

  • Latch Type

    Most residential doors are mortised for either a round corner or square corner latch. Drive-in latches do not have a faceplate and are generally used on hollow doors.
    Please Select One

  • Handle Style

    There are Handle Style options available for this product. Selecting one is required to complete the unit. Mouse over text for image of the option.
    Please Select One
$316.80

Product Overview

All Emtek items are made to order.

Features:

  • Standard Door Prep
  • Schlage C Keyway
  • Hand Forged Wrought Steel Trim

Specifications:

  • Height: 17"
  • Width: 2-9/16"
  • Projection: 3"
  • Material: Wrought Steel
  • Door Thickness: 1-5/8 - 2-7/8"
  • Backset: 2-3/8" or 2-3/4"

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8"
Center to Center
4.5 in.
Cross Bore
2-1/8"
Door Thickness
1-3/4", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8", 2-7/8"
Edge Bore
1"
Grip Center to Center
8.625 in.
Handle Projection
3 in.
Overall Height
17 in.
Trim Width
2.5625 in.

Characteristics and Features

Function
Single Cylinder
Handing
Left, Right
Handle Material
Metal
Handle Style
Grip
Keyway
C
Latch Faceplate
Round Corner, Square Corner
Lock Style
Single Point
Material
Steel
Mount
Sectional
Style
Traditional/Classic
Theme
Vintage

Warranty and Product Information

Approved for Commercial Use
No
Collection
Wrought Steel
Series
Lafayette