Emtek 454919DB Deep Burgundy Creston Sandcast Bronze Double Cylinder Grip By Grip Handleset

Item #: BCI1229054

The Lowest Price in the World on All EMTEK

Use Coupon Code: EMTEK at checkout to receive additional savings!
Offer Ends 7/31/2014

$638.00
Shipping: Free Shipping! See Details
Ships In:
Availability based on Finish selected
Finish:
Deep Burgundy
Stock:
0 In Stock
Quantity:
 

Discontinued

Please finish configuring above

Technical Specs

Template - Left Hand
Template - Right Hand
Installation Guide
Specification Sheet
Backset 2-3/4", 2-3/8"
Center to Center 5.5
Collection Sandcast Bronze
Configuration Non-Mortise
Door Thickness 1-3/4", 2-1/4"
Function Double Cylinder
Grip Center to Center 9.4375
Handing Left, Right
Handle Material Metal
Height 19
Interconnected No
Lock Style Single Point
Material Bronze
Mount Full Plate
Projection 3
Series Creston
Style Transitional
Width 2.8125

Configure your Emtek 454919DB Creston Sandcast Bronze Double Cylinder Grip By Grip Handleset

  • Backset more info ▼

    The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
  • Door Thickness more info ▼

    Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
  • Free Keying Option more info ▼

    Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.


    Please contact customer service for quotes on master keying or to key multiple manufacturers alike.


    Two keys provided per key code.

  • Latch Type more info ▼

    Most residential doors are mortised for either a round corner or square corner latch. Drive-in latches do not have a faceplate and are generally used on hollow doors.

Discontinued

Please finish configuring above

Creston Style Double Cylinder Grip By Grip Handleset

Emtek is committed to bringing interesting, well made hardware back into American homes. Their mission is to make it possible for home owners to apply these higher expectations to door locks while striving to provide a broad, interesting range of products that consumers can use as elements of decor, not just as a way to latch a door.

Knobs and lever handles are supported by springs mounted behind the rosettes and sideplates. These springs return the handles back to the "rest" position and prevent lever sag. Latches are heavy duty diecast construction, with strong internal springs, solid brass nose bolts and sintered metal cams. A plastic bushing located in the joint between handle and rosette ensures a friction free wear surface. This prevents metal from bearing on metal and provides smooth long-lasting operation. Handles are positively connected to rosettes with a permanent clip and each has a set screw which, when tightened, eliminates "handle wobble". The threaded tubes inside an Emtek lock are machined brass, not steel. The use of brass ensures good threads and prevents corrosion for easy installation and long life.

  • Sets fit standard door thickness 1-3/4", specify if different.

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Height: 19"
  • Width: 2-13/16"
  • Projection: 3"

Additional Emtek Links

Our SKU: 454919

This product is listed under the following manufacturer number(s):

  • Deep Burgundy
    454919DB
  • Flat Black
    454919FB
  • Medium Bronze
    454919MB
  • Silver Patina
    454919SP

*Denotes a finish or option that has been discontinued

No Questions Found

Emtek Creston Collection

Warranty Info

Emtek Limited Warranty

Emtek Products, Inc. (the “Company”) warrants to the original purchaser that, except for products with Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes, the products manufactured by it (the “Products”) are free of defects in material and workmanship, provided:

  • the Company has been notified within five years of purchase date and has been given the opportunity of inspection by return of any alleged defective Products to the Company, free and clear of all liens and encumbrances, transportation prepaid, accompanied by a statement of defects and proof of purchase; and
  • the Product has not been modified, abused, misused or improperly installed, maintained and/or repaired during such period; and there is no warranty on Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes.

The Company shall, at its option, either repair or replace, free of charge, any Products or part thereof found upon the Company’s inspection, to be so defective, or at the Company’s sole discretion refund the purchase price, less a reasonable allowance for depreciation, in exchange for the Product.

The Company makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above. The Company’s maximum liability hereunder is limited to the purchase price of the product. In no event shall the Company be liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of the product, whether in contract, tort, strict liability or otherwise.

Notes:

  • Some states do not allow limitations on incidental consequential damages or how long an implied warranty lasts so that the above limitations may not fully apply.
  • This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state.
  • For warranty service please contact Build.com customer service at (800) 375-3403.
Recently viewed items