4" Height Solid Brass Rectangular Flush Pull for Sliding Doors from the Door Accessories Collection
Emtek's door pulls and plates for non-latching doors are as exquisitely and finely crafted as its operating locks, and are made of the same beautiful and rugged materials.
For a quality, beautiful look, Emtek's Door Accessories cannot be beat. Like all Emtek products, the craftsmanship and materials that go into their household hardware is top quality. Emtek's brass hardware coordinates perfectly with other household hardware finishes.
- Solid Brass
- Height: 4"
- Width: 1-3/4"
Emtek is dedicated to bringing interesting, well made hardware back into American homes. Emtek's mission is to satisfy the higher expectations of today's homeowners with regard to door locks. They strive to provide a broad and interesting range of products that consumers can use as elements of decor, and not just as a way to latch a door.
Additional Emtek Links
Our SKU: 2201
This product is listed under the following manufacturer number(s):
- Deep Burgundy
- Flat Black
- French Antique
- Lifetime Polished Brass
- Medium Bronze
- Oil Rubbed Bronze
- Polished Chrome
- Satin Nickel
- Satin Steel
- Silver Patina
*Denotes a finish or option that has been discontinued
5 Questions from the Community
The Emtek 2201 requires a cut out depth of 13/16.
How deep is the recess?
A. The Emtek 2201 requires a cut out depth of 13/16.
The Emtek 2201 is a flush pull so it should not project very far. They do not give that dimension, but I couldn't imagine it projecting more than 1/16".
What is the projection of the lip past the face of the door?
A. The Emtek 2201 is a flush pull so it should not project very far. They do not give that dimension, but I couldn't imagine it projecting more than 1/16".
The Emtek 2201 is only one side. Two would need to be ordered if you wanted one on each side. You can use a 2221 with the 2201. I hope this helps!
Do I need to order 2 of these to have one on each side of the door or is it a set of 2? Also, do I also need to order the Emtek 2221 to have a pull on the end, and if so will it work in conjunction with these 2 pulls?
A. The Emtek 2201 is only one side. Two would need to be ordered if you wanted one on each side. You can use a 2221 with the 2201. I hope this helps!
The Emtek 2201 is 3/8" deep.
What is the depth of the flush pull. Q2 and Q4 show completely different depths or recesses and doesn't correlate with 3/8" and 13/16"
A. The Emtek 2201 is 3/8" deep.
The Emtek 2201 requires a hole that is 1-7/16" wide by 3-5/8" tall and by 3/8" deep.
What is the dimension of the hole that must be routed in the door?
A. The Emtek 2201 requires a hole that is 1-7/16" wide by 3-5/8" tall and by 3/8" deep.
Emtek Sliding Door Pull Collection
Emtek Limited Warranty
Emtek Products, Inc. (the “Company”) warrants to the original purchaser that, except for products with Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes, the products manufactured by it (the “Products”) are free of defects in material and workmanship, provided:
- the Company has been notified within five years of purchase date and has been given the opportunity of inspection by return of any alleged defective Products to the Company, free and clear of all liens and encumbrances, transportation prepaid, accompanied by a statement of defects and proof of purchase; and
- the Product has not been modified, abused, misused or improperly installed, maintained and/or repaired during such period; and there is no warranty on Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes.
The Company shall, at its option, either repair or replace, free of charge, any Products or part thereof found upon the Company’s inspection, to be so defective, or at the Company’s sole discretion refund the purchase price, less a reasonable allowance for depreciation, in exchange for the Product.
The Company makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above. The Company’s maximum liability hereunder is limited to the purchase price of the product. In no event shall the Company be liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of the product, whether in contract, tort, strict liability or otherwise.
- Some states do not allow limitations on incidental consequential damages or how long an implied warranty lasts so that the above limitations may not fully apply.
- This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state.
- For warranty service please contact Build.com customer service at (800) 375-3403.