|Spec Sheet for Deltana S35R4|
|Approved for Commercial Use||Yes|
|Corners||1/4" Radius Corner|
|Hinge Type||Butt Hinge, Plain Bearing|
|Number of Holes||6|
|Number of Knuckles||5|
Steel Collection Deltana 1/4" Radius Corner 3.5" x 3.5" Steel Plain Bearing Mortise Hinge - Pair
Look no further for your dependable, heavy duty, quality, steel hinge. Deltana hinges provide you with the durable aesthetics you need to make your business or home the best place possible.
- Sold as Pair
- Plain Bearing Hinge
- Residential Strength
- Removable Pin: Yes
- Wood Screws Included
- 1/4" Radius Corners
- Traditional / Classic Theme
- Arc Hole Pattern
Plain Bearing Hinge: Plain bearing hinges feature knuckles that are machined to a smooth surface, allowing them to move against one another without bearings. Plain bearing hinges are not recommended for heavy use on high traffic entrance ways, but meet the need of a standard residential door.
Material - Steel: Steel is cheap strong and durable making it a favorite for hinges of all types. Though it is more prone to rusting than solid brass or stainless steel.
Mounting: The standard corners for mortised door hinges are 1/4" radius, 5/8" radius and square corner. It is recommended that three hinges be used on doors up to and including 7.5 feet with one additional hinge for each additional 2.5 feet. Make sure you check your current hinges before making a purchase.
- 3.5 Inch Height
- 3.5 Inch Width
- Made from Steel
- Mount: Mortise
- Gauge: 0.085" (Thickness of Hinge Steel)
- 5 Knuckles
- 6 Screw holes
Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. Deltana inventories the country’s largest selection of architectural, lighting, and door hardware in over nine fine finishes made from solid brass, zinc, aluminum, steel and stainless steel.
Additional Deltana Links
Our SKU: S35R4
This product is listed under the following manufacturer number(s):
Oil Rubbed Bronze
*Denotes a finish or option that has been discontinued
3 Questions from the Community
Does a pair mean a set of 3 or 2?
Is the hinge pin removable?
Looking for 2and 1/2 to 3 and 1/2 inch Deltana (or other good hinge) for casement windows - need to swing open 180 degrees, Will these work?
Deltana Steel Collection
Other Products In The Deltana Steel Collection
4" x 4" Stainless Steel Square Corner Ball Bearing Mortise Hinge - Pair
4" x 4" Stainless Steel Square Corner Plain Bearing Mortise Hinge - Pair
3.5" x 3.5" Square Corner Plain Bearing Mortise Hinge - Pair
4.5" x 4.5" Square Corner Ball Bearing Mortise Hinge - Pair
3.5" x 3.5" Plain Bearing 1/4" Radius Corners Mortise Hinge - Pair