- Made in the U.S.A. (Manufacturing plants: Greensburg, Indiana; Jackson, Tennessee)
- Fully covered under Delta's limited lifetime warranty
- All brass construction; forged from solid brass stock
- Accepts all Delta mixing valve trims/cartridges, including all Monitor and TempAssure models
- Universal inlet/outlet connections (PEX, IPS, copper)
- Integrated service stops (allows for turning off water at valve, preventing whole-house interruptions)
- High-flow - designed for shower systems (note: shower only; tub port is plugged)
- Sturdy mounting bracket included - prevents rocking and allows for securing to stringers
- Square plaster guard, the size of a standard tile allows for right-angle cuts. Removable and snaps back into place
- Heat-resistant pressure test cap for air/water testing before cartridge is installed
- Back-to-back installation capabilities
- Note: this is the rough-in valve only - valve trim (which includes the cartridge) required to complete
Additional Delta Links
- View Manufacturer Warranty
- Shop All Delta MultiChoice Collection Products
- Buy Replacement Parts For Delta R10000-UNWSHF
Our SKU: R10000-UNWSHF
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
6 Questions from the Community
The Delta R10000-UNWSHF is strictley for showers only, the port that would direct the water to the tub is plugged.
can this item be use as a shower and tub? what will i have to do to use it for the tub?
A. The Delta R10000-UNWSHF is strictley for showers only, the port that would direct the water to the tub is plugged.
The Delta R10000-UNWSHF will work with a high pressure up to 6.0 gpm.
Will a High-Pressure rain shower head work with this valve?
A. The Delta R10000-UNWSHF will work with a high pressure up to 6.0 gpm.
The Delta R10000-UNWSHF will work with the T14038.
Will this valve work with the Delta T14038?
A. The Delta R10000-UNWSHF will work with the T14038.
The HF in R10000-UNWSHF stands for HIGH FLOW. If you are using a shower head and one hand shower, you do NOT need a high flow valve. It will work, but you will end up paying a great deal more than necessary.
I have T17253 in addition with the Moen 3887 hand shower and no tub, can I use R10000-UNWSHF as the rough in?
A. The HF in R10000-UNWSHF stands for HIGH FLOW. If you are using a shower head and one hand shower, you do NOT need a high flow valve. It will work, but you will end up paying a great deal more than necessary.
The flow rate is determined by the Delta trim and cartridge used. At 60psi 1300/1400 series-7.9 gpm, 1700 series-6.7 gpm and 17T series-9.0 gpm.
What is the GPM rating for this valve?
A. The flow rate is determined by the Delta trim and cartridge used. At 60psi 1300/1400 series-7.9 gpm, 1700 series-6.7 gpm and 17T series-9.0 gpm.
Yes, the Delta R10000-UNWSHF rough in valve will work with the item you are looking at.
Will this valve work with Item #BCI1948770? I am planning on adding a seperate Rain head as well.
A. Yes, the Delta R10000-UNWSHF rough in valve will work with the item you are looking at.
Delta MultiChoice Collection
Other Products In The Delta MultiChoice Collection
Universal Mixing Rough-In Valve - For Use with All...$29.60-$29.60(89)
Universal Mixing Rough-In Valve with Service Stops$41.51-$41.51(10)
Universal Mixing Rough-In Valve with PEX Connectio...$41.51-$41.51
Universal Mixing Rough-In Valve with PEX Connections$29.61-$29.61(2)
Universal Mixing Rough-In Valve with Thin Wall Ins...$31.77-$31.77(2)
With Delta® Faucet Company, you can be sure you're getting products of the highest quality.
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service.
This number is for customer use only : Customer Direct Replacement parts may be obtained by calling 1-800-345-DELTA (3358) or by writing:
- Delta Faucet Company Product Services
55 E. 111th Street Indianapolis, IN 46280
Labor charges and/or damage incurred in installation, repair, or replacement, as well as any other kind of loss or damage are excluded.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Delta for all warranty claims.
This is the exclusive warranty by delta faucet company, which does not make any other warranty of any kind, including the implied warranty of merchantability.
This warranty excludes all industrial, commercial and business usage, of faucets whose purchasers are hereby extended a five-year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty. This warranty is applicable only to Delta faucets manufactured after January 1, 1995.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damages to this faucet as a result of misuse, abuse, or neglect or any use of other than genuine Delta replacement parts WILL VOID THE WARRANTY. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. It applies only to Delta faucets installed in the United States of America, Canada and Mexico.
If you have any questions or concerns regarding our warranty plan, please e-mail us, or call 1-800-345-DELTA (3358).