- Made in the U.S.A. (Manufacturing plants: Greensburg, Indiana; Jackson, Tennessee)
- Fully covered under Delta's limited lifetime warranty
- All brass construction; forged from solid brass stock
- Accepts all Delta mixing valve trims/cartridges, including all Monitor and TempAssure models
- Universal inlet/outlet connections (IPS, copper)
- Sturdy mounting bracket included - prevents rocking and allows for securing to stringers
- Square plaster guard, the size of a standard tile allows for right-angle cuts. Removable and snaps back into place
- Heat-resistant pressure test cap for air/water testing before cartridge is installed
- Back-to-back installation capabilities
- Note: this is the rough-in valve only - valve trim (which includes the cartridge) required to complete
Additional Delta Links
Our SKU: R10000-UNBX
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
16 Questions from the Community
Is this valve low lead compliant?
What is the difference between the R10000-UNBX and R10000-UNWS? I'm planning to purchase the T17T055-RB shower control.
A. The Delta R10000-UNBX 1/2 Inch Rough-In is the same as the R10000-UNWS 1/2 Inch Rough-In, but the latter of the two has a service stop at the valve. This means that if you had a leak or if you were servicing another fixture in the bathroom, you could just turn off the bath/shower and still have the function of the sink and toilet or whatever other fixtures you have. With other valves, you would have to turn off the main water supply. If you need to shut off water to the valve, you just remove the handle and there is a flat-head screw to turn.
do I need this for the Delta rain showerhead or is this for a tub faucet
A. This is the rough in valve for a tub and/or shower. This is what controls the water flow (on/off/temp)to your system whether it is to a shower head or tub spout. You need valve trim that attaches on the outside of the wall to this rough in valve.
What is the difference between the Delta R10000-UNBX and the Delta R10000-UN?
Can I use this valve body with a Moen fixture? It appears identical.
Is this valve compatable with the Brizo shower trims?
What trims are available for this valve body?
Is there anywhere that is open on Sunday tomorrow and I can pick it up since I need it tomorrow?
Will R10000-UNBX valve work with T17255 trim?
Will this connect directly to 1/2 cpvc using solvent, not requiring any adapters?
A. The Delta R10000-UNBX will connect to 1/2" supply with out any adapter. If you look at the installation guide under the product details it will go through the full process for installation. Let me know if you have any other questions.
whats' the difference between R10000-UNBX and R10000-IP?
Is this pressure balanced
Why do I need the R10000-UNBX and also the R11000 diverter rough-in? What is the function of each?
Will water flow first to the tub spout below this valve and then up to the shower when the tub spout diverter is closed?
What is the flow rate, at 40PSI, of this valve?
what is the difference between the Delta R10000-UNBX and the Delta R10000 IPWS
Delta MultiChoice Collection
Other Products In The Delta MultiChoice Collection
Universal Mixing Rough-In Valve with IPS connections
Universal Mixing Rough-In Valve with Service Stops
Universal Mixing Rough-In Valve - For Use with All Delta Shower Mixing Valve Trims
Universal Mixing Rough-In Valve with IPS connections and Service Stops
Universal Mixing Rough-In Valve with High-Flow
With Delta® Faucet Company, you can be sure you're getting products of the highest quality.
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service.
This number is for customer use only : Customer Direct Replacement parts may be obtained by calling 1-800-345-DELTA (3358) or by writing:
- Delta Faucet Company Product Services
55 E. 111th Street Indianapolis, IN 46280
Labor charges and/or damage incurred in installation, repair, or replacement, as well as any other kind of loss or damage are excluded.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Delta for all warranty claims.
This is the exclusive warranty by delta faucet company, which does not make any other warranty of any kind, including the implied warranty of merchantability.
This warranty excludes all industrial, commercial and business usage, of faucets whose purchasers are hereby extended a five-year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty. This warranty is applicable only to Delta faucets manufactured after January 1, 1995.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damages to this faucet as a result of misuse, abuse, or neglect or any use of other than genuine Delta replacement parts WILL VOID THE WARRANTY. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. It applies only to Delta faucets installed in the United States of America, Canada and Mexico.
If you have any questions or concerns regarding our warranty plan, please e-mail us, or call 1-800-345-DELTA (3358).