|Drain Assembly Included||No|
|Faucet Centers||10, 11, 12, 13, 14, 15, 16, 8, 9|
|Faucet Type||Bathtub Faucet|
|Flow Rate (GPM)||18|
|Installation Type||Deck Mounted|
|Number Of Handles||2|
This product has additional required/recommended options. To configure, add to your cart.
Rough In Valve Required
- Fully covered under Delta's limited lifetime warranty
- All-brass faucet construction
- Superior finishing process - faucet finish covered under lifetime warranty
- Sensible styling that complements any home
- Classically styled faucets and accessories handle the toughest of tasks with ease
- Double handle 1/4 turn operation
- ADA compliant
- Extra secure mounting assembly
- All necessary mounting hardware included
- Overall Height: 4-1/2" (measured from mounting deck to highest point of faucet)
- Spout height: 3" (measured from mounting deck to faucet outlet)
- Spout reach: 6-7/8" (measured from center of faucet base to center of faucet outlet)
- 18 gallons-per-minute flow rate
- Installs onto decks up to 1-1/4" thick
- 2 handles included
- Rough-in valve not included (when adding to cart, valve will be offered)
Delta is more than just a brand of kitchen and bathroom faucets. It’s a name that represents what’s possible in today’s plumbing technologies. Every kitchen and bathroom in every home is unique, and with a wide range of pricing and features, Delta faucets and fixtures can meet every need.
Delta is driven by its quest for innovation—and this applies to its kitchen and bathroom faucets and fixtures. From Touch2O technology (which turns the faucet on and off with just a touch) and MagnaTite technology (which eliminates droopy pull-down spray heads), to H2Okinetic showers (for a warmer and more luxurious shower experience), your life is simplified through innovations. And if you’re searching for a product to offer an eye-catching focal point, while providing durability and reliability for a lifetime, look no further than Delta.
From extremely affordable and reliable faucets to fully loaded fixtures featuring today’s leading technologies, Delta has a faucet for everyone.
Additional Delta Links
- View Manufacturer Warranty
- Shop All Delta Foundations Collection Products
- Buy Replacement Parts For Delta BT2710
Our SKU: BT2710
This product is listed under the following manufacturer number(s):
- Brilliance Stainless
*Denotes a finish or option that has been discontinued
3 Questions from the Community
The Delta BT2710 will require its own rough in valve. The part number is R2707.
Will this faucet fit the valve of an existing Delta faucet?
A. The Delta BT2710 will require its own rough in valve. The part number is R2707.
The Delta BT2710 can have the handles changed. The acrylic handles are the H41 and the base and gasket part number is RP18300.
Can I use the lever handles to replace classic acrylic handles on my old faucet?
A. The Delta BT2710 can have the handles changed. The acrylic handles are the H41 and the base and gasket part number is RP18300.
The Delta BT2710 can replace the T2710 because they use the same valve.
can this trim kit replace a delta model # 2710 trim kit? will the base cover the set pin hole left by the original faucet?
A. The Delta BT2710 can replace the T2710 because they use the same valve.
Delta Foundations Collection
Other Products In The Delta Foundations Collection
Foundations Kitchen Faucet$52.92-$52.92
Foundations Kitchen Faucet$58.37-$58.37(2)
Foundations Single Handle Kitchen Faucet With Spray$68.82-$68.82(7)
Foundations Side Spray Kitchen Faucet$64.25-$64.25
Foundations Pressure Balanced Mixing Valve Trim an...$33.67-$46.03(3)
With Delta® Faucet Company, you can be sure you're getting products of the highest quality.
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service.
This number is for customer use only : Customer Direct Replacement parts may be obtained by calling 1-800-345-DELTA (3358) or by writing:
- Delta Faucet Company Product Services
55 E. 111th Street Indianapolis, IN 46280
Labor charges and/or damage incurred in installation, repair, or replacement, as well as any other kind of loss or damage are excluded.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Delta for all warranty claims.
This is the exclusive warranty by delta faucet company, which does not make any other warranty of any kind, including the implied warranty of merchantability.
This warranty excludes all industrial, commercial and business usage, of faucets whose purchasers are hereby extended a five-year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty. This warranty is applicable only to Delta faucets manufactured after January 1, 1995.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damages to this faucet as a result of misuse, abuse, or neglect or any use of other than genuine Delta replacement parts WILL VOID THE WARRANTY. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. It applies only to Delta faucets installed in the United States of America, Canada and Mexico.
If you have any questions or concerns regarding our warranty plan, please e-mail us, or call 1-800-345-DELTA (3358).