|Light Direction||Ambient Lighting|
|Number of Bulbs||1|
|Suggested Room Fit||Outdoor|
|Watts Per Bulb||60|
Craftmade 1 Light Outdoor Wall Washer from the Vale Collection
- Champagne frost glass
- Fixture is closed at top and bottom
- Height: 9.5"
- Width: 7.75"
- Depth from Wall: 3.625"
- Number of Bulbs: 1
- Bulb Base: Candelabra (E12)
- Bulb Type: Incandescent
- Bulb Included: No
- Wattage: 60
- Energy Star: No
- Photocell: No
- UL Listed: Yes
- UL Rating: Wet Location
Additional Craftmade Links
Our SKU: Z4302
This product is listed under the following manufacturer number(s):
- Oiled Bronze
*Denotes a finish or option that has been discontinued
10 Questions from the Community
The Craftmade Z4302 is closed at both ends.
Are both ends open?
A. The Craftmade Z4302 is closed at both ends.
The height from the center of the backplate to the top of the fixture measures 4"
Is the opening centered in the back? I want fixture to hang low relative to the wiring and hope the wiring and mounting frame is higher up on the back.
A. The height from the center of the backplate to the top of the fixture measures 4"
The Craftmade Z4302 is a wall washer and installs flush with the wall, so the dimensions are the same 7.75 inches wide and 9.5 inches high.
What are the dimensions of the back plate?
A. The Craftmade Z4302 is a wall washer and installs flush with the wall, so the dimensions are the same 7.75 inches wide and 9.5 inches high.
The Craftmade Z4302 can be installed horizontally.
can i turn it horizontaly and our both ends closed
A. The Craftmade Z4302 can be installed horizontally.
The Craftmade Z4302 is not dimmable.
is the fixture dimmable?
A. The Craftmade Z4302 is not dimmable.
The Craftmade Z4302 is wet rated.
UL wet listed?
A. The Craftmade Z4302 is wet rated.
The Craftmade Z4302 does require unscrewing the bottom to change the bulb.
How is the bulb changed? Does it require unscrewing the bottom plate?
A. The Craftmade Z4302 does require unscrewing the bottom to change the bulb.
The Craftmade Z4302 requires 1, 60w Medium base bulb.
Is this energy efficient? Can this be used with a CFL bulb?
A. The Craftmade Z4302 requires 1, 60w Medium base bulb.
The Craftmade Z4302 has a height that measures from the top to the bottom of 9.5".
What is the distance from the top of the mounting area to the top of the fixture?
A. The Craftmade Z4302 has a height that measures from the top to the bottom of 9.5".
The Craftmade Z4302 has a height of 9.5" a width of 7.75" and an extends 3.625" out.
what are the dimensions?
A. The Craftmade Z4302 has a height of 9.5" a width of 7.75" and an extends 3.625" out.
Craftmade Vale Collection
Other Products In The Craftmade Vale Collection
Pivoting Toilet Paper Holder from the Vale Collection$16.59-$21.53(7)
24" Towel Bar with Mounting Hardware from the Vale...$15.72-$23.87(3)
6" Towel Ring with Concealed Mounts from the Vale ...$12.01-$15.68(2)
Double Hook Robe Hook from the Vale Collection$9.26-$12.00(2)
18" Towel Bar with Mounting Hardware from the Vale...$16.91-$16.91
Craftmade warrants against defects in materials or workmanship for a minimum of TWO (2) YEARS from date of purchase for use, and agrees to repair or, at our option, replace a defective unit without charge.
IMPORTANT: This Warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care (as listed on the instructions), the affixing of any attachment not provided with the product, alteration of any attachments factory installed, loss of parts or subjecting the fixture to any but the specified electrical service.
This warranty does not cover failure of bulbs due to accidents, abuse, misuse, vandalism, power surges, and acts of nature such as lightning damage or any bulbs purchased separately and installed by the consumer or any damage to the fixture caused by a separately purchased bulb.
No responsibility is assumed for any special incidental or consequential damages. Damages occurring during transit are not covered by this warranty.
To obtain warranty service, mail sales receipt as proof of purchase-date, and a brief explanation of the nature of the defect, to P.O. Box 1037, Coppell, TX 75019. You will receive, by mail, a Return Goods Authorization number issued by Craftmade, and returned freight prepaid.